Shark APEX DUO CLEAN AX950 Owner's Guide
![Shark APEX DUO CLEAN AX950 Vacuum manual cover](/images/UhkEeQpJbPzuYpphNGxacSFG/thumbs/thumb175x175.webp)
To assemble the Shark APEX DuoClean AX950, start by connecting the wand to the motorized floor nozzle. Then, attach the handle to the top of the wand. Finally, connect the hose to the wand and the vacuum body. Ensure all connections are secure before use.
If the vacuum loses suction, first check for blockages in the hose, wand, and nozzle. Clean the dust cup and wash or replace the filters if necessary. Ensure that the brushroll is free of hair and debris.
It is recommended to clean the pre-motor foam and felt filters every three months and the HEPA filter once a year. Rinse them under lukewarm water and allow them to air dry completely before reinserting.
If the brushroll is not spinning, check that the vacuum is set to the appropriate floor type. Inspect the brushroll for any obstructions or tangled debris, and clean it as needed. Ensure the brushroll indicator light is green.
To maintain the DuoClean brushroll, regularly remove any hair or debris wrapped around it. You can use scissors or a brush to clean it. Ensure the brushroll is dry before reinstalling it.
Yes, the Shark APEX DuoClean AX950 is designed for use on both carpeted and hard floor surfaces. The DuoClean technology effectively picks up large debris and fine dust on hardwood floors without scratching.
If the vacuum overheats, turn it off and unplug it immediately. Check for blockages in the hose and filters, and clean them if necessary. Allow the vacuum to cool for at least 45 minutes before attempting to use it again.
To empty the dust cup, first, detach it from the vacuum body. Hold it over a trash bin and press the bottom door release button to empty the contents. Close the dust cup securely before reattaching it to the vacuum.
The Shark APEX DuoClean AX950 typically comes with a crevice tool, pet multi-tool, and motorized pet tool. Use the crevice tool for tight spaces, the pet multi-tool for pet hair and upholstery, and the motorized pet tool for deep cleaning pet hair from carpets and furniture.
If the LED headlights are not working, ensure the vacuum is plugged in and turned on. Check for any loose connections in the nozzle area. If the issue persists, contact Shark customer service for further assistance.