Severin RKS 8830 Instructions Manual
![Severin RKS 8830 Refrigerator manual cover](/images/tlXcOhZIPEsShXppluqGngfC/thumbs/thumb175x175.webp)
To adjust the temperature, locate the thermostat dial inside the refrigerator. Turn the dial clockwise to decrease the temperature or counterclockwise to increase it. Allow 24 hours for the temperature to stabilize after making adjustments.
Ensure that the thermostat is set to the correct temperature. Check if the door seals are clean and intact. Make sure the refrigerator is not overloaded, and that there is adequate ventilation around it. If the problem persists, consult a technician.
The Severin RKS 8830 is equipped with an automatic defrost system, meaning you typically do not need to manually defrost it. However, if ice build-up occurs, it may need manual defrosting.
Regularly clean the interior with a mild detergent and warm water. Check the door seals to ensure they are clean and functioning properly. Vacuum the condenser coils at least twice a year to improve efficiency.
Ensure the refrigerator is placed away from heat sources and direct sunlight. Keep the door closed as much as possible, and ensure the seals are airtight. Regularly clean the condenser coils and avoid overloading the refrigerator.
Unusual noises can be caused by the refrigerator being unlevel, items inside vibrating against the walls, or the compressor cycling on and off. Ensure the refrigerator is level and try rearranging items inside. If the noise persists, consult a technician.
First, check if the refrigerator is properly plugged in and receiving power. If the light bulb is burnt out, replace it with a new one of the same type. If the problem continues, there may be an issue with the light socket or wiring.
Store food in sealed containers and regularly check for expired items. Clean the interior with a mixture of baking soda and water. Placing an open box of baking soda inside can also help absorb odors.
Use a soft cloth and a mild detergent mixed with water to clean the exterior surfaces. Avoid using abrasive cleaners or scouring pads as they can damage the finish.
Refer to the user manual for detailed instructions on reversing the door swing. It typically involves removing the hinges and reattaching them on the opposite side. Ensure the refrigerator is unplugged during this process for safety.