Severin KS 9050 Instructions Manual
![Severin KS 9050 Refrigerator manual cover](/images/NpavRKKyAXItXiMVqbAeeTyA/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the thermostat dial inside the refrigerator compartment. Turn the dial to the desired setting, typically between 1 (warmest) and 7 (coldest).
Ensure that the refrigerator is plugged in and the power is on. Check the temperature setting and make sure the door seals are clean and intact. If the issue persists, consider cleaning the condenser coils or contacting customer service for further assistance.
The Severin KS 9050 is typically a frost-free model, meaning manual defrosting is not necessary. However, if you notice frost buildup, ensure that the door is sealing properly and not left open for extended periods.
To clean the interior, remove all food and shelves. Use a mild detergent and warm water to wipe down the surfaces. Rinse with clean water and dry with a soft cloth before replacing shelves and food.
Water pooling may be due to a blocked defrost drain. Check and clear the drain hole located at the back of the fridge compartment. Ensure that the refrigerator is level to allow proper drainage.
Unusual noise can be caused by the refrigerator not being level, items inside vibrating, or the compressor. Ensure the fridge is on a level surface, rearrange items inside, and check if the noise persists. Contact support if it does.
First, unplug the refrigerator. Check the bulb and replace it if necessary. If the new bulb does not work, examine the light switch for damage, and consider consulting a technician if needed.
Keep the refrigerator in a cool, dry place away from direct sunlight and heat sources. Ensure the door seals are tight and clean, and avoid overloading the refrigerator to allow air circulation.
It is not recommended to place hot food directly into the refrigerator as it can raise the internal temperature, leading to inefficient cooling. Allow food to cool to room temperature before refrigeration.
Check that the fridge is properly plugged in and the outlet is functional. Inspect the circuit breaker or fuse for any issues. If the problem persists, contact Severin customer support for assistance.