Severin KGK 8913 Instructions Manual

To change the temperature settings, locate the control panel inside the refrigerator. Use the temperature adjustment buttons to set your desired temperature for both the fridge and the freezer compartments.
Ensure that the refrigerator is plugged in and the temperature settings are correct. Check for any obstructions blocking the air vents inside the compartments. Clean the condenser coils if they are dusty. If the issue persists, consult the user manual or contact customer support.
The Severin KGK 8913 is equipped with a No Frost system, which eliminates the need for manual defrosting. However, if you notice frost build-up, ensure that the door seals are intact and the door is fully closed.
To clean the interior, turn off and unplug the refrigerator. Remove all food items and shelves. Use a mixture of mild detergent and warm water to wipe down the walls and shelves. Rinse with clean water and dry thoroughly before replacing the shelves and food items.
Ensure the refrigerator is level and on a stable surface. Check for any loose panels or components. Make sure the fridge isn't touching the wall or any other appliance. If the noise persists, it might be due to the compressor or fan, and professional service may be required.
Check if the defrost drain is clogged. Clean the drain using a mixture of baking soda and water. Also, ensure that the door seals are in good condition to prevent condensation.
Unplug the refrigerator and locate the light cover inside the fridge. Remove the cover by unscrewing it or releasing the clips, depending on the model. Replace the old bulb with a new one of the same type and wattage. Secure the cover back in place and plug the refrigerator back in.
Yes, the doors of the Severin KGK 8913 are reversible. Refer to the user manual for detailed instructions on how to safely change the door hinge direction.
Regularly clean the condenser coils to ensure efficient operation. Check and clean door seals to maintain a proper seal. Verify that the refrigerator is level for optimal performance.
Ensure the ice maker is turned on and the water supply line is connected and open. Check for any ice blockages in the ice maker mechanism. If issues persist, consult the user manual or contact customer support for further assistance.