Sencor SVS 0910WH User Manual
![Sencor SVS 0910WH Vacuum Sealer manual cover](/images/rAYyOFRdtWtbyAUHIhRNYBQi/thumbs/thumb175x175.webp)
To seal a bag, place the open end of the bag into the vacuum chamber, close the lid securely, and press the 'Vacuum & Seal' button. Wait for the process to complete before opening the lid.
Ensure the power cord is plugged in properly and the outlet is functioning. Check that the lid is closed securely and try pressing the start button again.
Unplug the unit and wipe the exterior and vacuum chamber with a damp cloth. Do not immerse the unit in water. Ensure all parts are dry before using it again.
It is recommended to use bags designed for vacuum sealing. Using non-compatible bags can result in poor sealing performance.
Store the vacuum sealer in a cool, dry place. Make sure the lid is not locked to prevent deformation of the sealing gasket.
Check if the sealing strip and vacuum chamber are clean and free from debris. Also, ensure the bag is positioned correctly in the chamber and is not leaking.
Regularly clean the sealing strip and vacuum chamber. Check for any wear on the gasket and replace it if necessary.
It's best to freeze liquids first or use a special liquid-blocking method to prevent them from being sucked into the machine.
Ensure the sealing strip is clean and the bag is not wrinkled at the sealing area. Try adjusting the bag position and ensure the lid is properly closed.
The Sencor SVS 0910WH can accommodate bags up to 30 centimeters in width.