Sencor SVC 900-EUE3 User Manual
![Sencor SVC 900-EUE3 Vacuum Cleaner manual cover](/images/CSvDeqCpDCSJMjhoyZDNbNNc/thumbs/thumb175x175.webp)
To assemble the Sencor SVC 900-EUE3, first attach the hose to the main body, then connect the telescopic tube to the hose handle. Finally, attach the desired nozzle or accessory to the end of the tube.
If the vacuum loses suction, check if the dust bag or container is full and needs emptying. Ensure that the filters are clean and there are no blockages in the hose or nozzle.
To clean the filters, remove them from the vacuum cleaner and gently tap them to remove loose dust. For a deeper clean, rinse them under lukewarm water and let them dry completely before reinstalling.
Regular maintenance includes emptying the dust bag or container, cleaning the filters, and checking for blockages in the hose and nozzles. Also, inspect the power cord and plug for damage.
To replace the dust bag, open the dust compartment and remove the old bag. Insert a new dust bag by aligning it with the holder, ensuring it is securely placed before closing the compartment.
Check if the vacuum is plugged in properly and if the power outlet is functioning. Inspect the power cord for any damage and ensure that the vacuum is not overheating. If necessary, let it cool down before trying again.
Ensure that all parts are assembled correctly and that there are no blockages. Regularly clean the filters and empty the dust container to maintain optimal performance and reduce noise.
The vacuum cleaner typically includes a crevice tool, upholstery brush, and floor nozzle. Use the crevice tool for tight spaces, the upholstery brush for furniture, and the floor nozzle for general floor cleaning.
To store the vacuum cleaner, retract the power cord, and place the vacuum in an upright position. Store the attachments and accessories in a designated area to prevent loss or damage.
Yes, the Sencor SVC 900-EUE3 has adjustable suction power. You can modify it using the control dial located on the vacuum's body, allowing you to set the appropriate suction for various surfaces.