Sencor SVC 7020BK User Manual
![Sencor SVC 7020BK Vacuum Cleaner manual cover](/images/dBZejdcLcNIgGmbxbZmEldZv/thumbs/thumb175x175.webp)
To assemble the Sencor SVC 7020BK, start by attaching the handle to the main unit. Ensure it clicks into place securely. Then, attach the desired nozzle or brush to the suction tube until it is firmly connected.
First, check if the power cord is properly plugged into a working outlet. Ensure the power switch is in the 'ON' position. If the vacuum still does not turn on, check the circuit breaker or fuse box for any issues.
It is recommended to clean the filters after every 3-4 uses. The filters should be replaced every 3-6 months, depending on the frequency of use and the environment.
To maintain battery life, avoid letting the battery fully discharge. Charge the vacuum cleaner after each use and store it in a cool, dry place. Use the vacuum regularly to keep the battery in good condition.
Check for blockages in the nozzle, tube, or filter. Ensure the dust container is not full and the filters are clean. If necessary, replace the filters to restore optimal suction power.
The vacuum cleaner includes a crevice tool, dusting brush, and floor nozzle. Use the crevice tool for tight spaces, the dusting brush for delicate surfaces, and the floor nozzle for general floor cleaning.
To clean the dust container, detach it from the main unit, open the lid, and empty the contents into a trash bin. Rinse the container with water and let it dry completely before reattaching.
A burning smell may indicate a blockage, a dirty filter, or a malfunctioning motor. Turn off the vacuum and check for blockages. Clean or replace the filters. If the smell persists, contact customer service.
Check if the dust container is full or if the filters are clogged. Ensure the battery is adequately charged. If the vacuum continues to stop unexpectedly, inspect for any loose connections or obstructions.
After cleaning the vacuum and ensuring the dust container is empty, store it in a cool, dry place. Make sure the power cord is neatly wrapped to prevent kinks and damage.