Sencor SVC 6920OR User Manual
![Sencor SVC 6920OR Vacuum Cleaner manual cover](/images/evzZIXPcfXSlgAhWnetVjono/thumbs/thumb175x175.webp)
To assemble the Sencor SVC 6920OR, start by attaching the handle to the main body. Connect the hose to the suction inlet and attach the desired nozzle to the other end of the hose. Ensure all connections are secure.
To clean the filters, first unplug the vacuum cleaner. Remove the dust container and take out the filters. Rinse them under lukewarm water and let them dry completely before reinserting. Do not use detergents.
If the vacuum cleaner loses suction, check for blockages in the hose, nozzle, or filters. Clean or replace the filters if necessary. Ensure the dust container is not full and all parts are properly attached.
Replace the dust bag when it is about two-thirds full to maintain optimal performance. Frequent replacement may be necessary if used in environments with a lot of dust or pet hair.
Regularly check and clean the filters, replace the dust bag as needed, and inspect the hose and nozzles for blockages. Wipe the exterior with a damp cloth to keep it clean.
Yes, the Sencor SVC 6920OR is suitable for hardwood floors. Use the floor nozzle designed for hard surfaces to avoid scratching the floor.
If the vacuum cleaner overheats, turn it off and unplug it. Check for blockages in the hose, filters, and nozzles. Allow it to cool down before using it again.
Store the vacuum cleaner in a cool, dry place. Wrap the cord neatly and secure the hose and attachments on the designated holders to prevent damage.
No, the Sencor SVC 6920OR is not designed for liquid vacuuming. Vacuuming liquids can damage the motor and electrical components.
Ensure the vacuum is unplugged when performing maintenance. Do not use the vacuum on wet surfaces or for vacuuming flammable or combustible liquids. Keep away from children and pets while in operation.