Sencor SVC 5500WH 3AAA User Manual
![Sencor SVC 5500WH 3AAA Vacuum Cleaner manual cover](/images/lMgupIRUpbKRiWoClfKQvfwd/thumbs/thumb175x175.webp)
To assemble the vacuum cleaner, attach the handle to the main body until it clicks into place, then connect the hose to the main unit and attach the desired nozzle.
Check if the dust bag is full and replace it if necessary. Also, inspect the filters for blockages and clean or replace them as needed.
It is recommended to clean the filters every three months and replace them every 12 months for optimal performance.
The vacuum cleaner is suitable for use on hard floors, carpets, and upholstery. Use the appropriate nozzle for each surface type.
Regularly check and replace dust bags and filters, clean the brushes and nozzles, and store the vacuum in a dry place.
Turn off the vacuum cleaner and unplug it. Check for blockages in the hose or filters and clear them. Allow the unit to cool down before using it again.
No, the Sencor SVC 5500WH 3AAA is not designed for wet cleaning. Using it on wet surfaces may damage the appliance.
Open the dust compartment, remove the full dust bag by pulling on the cardboard tab, and insert a new bag by sliding it into the holder. Ensure it is securely in place before closing the compartment.
The crevice nozzle is for tight spaces, the brush nozzle is for upholstery and delicate surfaces, and the floor nozzle is for carpets and hard floors.
Ensure the power cord is plugged in and the outlet is working. Check for a blown fuse or tripped circuit breaker, and inspect the power switch for any damage.