Sencor SVC 45BK-EUE3 User Manual
![Sencor SVC 45BK-EUE3 Vacuum Cleaner manual cover](/images/gkNywfQeqIwIiwIwYRKnryZC/thumbs/thumb175x175.webp)
To clean the filters, first ensure the vacuum is unplugged. Remove the dust container and take out the filter. Tap it gently to remove dust, and if necessary, rinse it with water. Allow it to dry completely before reinserting.
Check if the dust container is full and empty it if needed. Inspect the filters for clogs and clean them. Ensure there are no blockages in the hose or attachments.
Filters should be replaced every 6 months or if they show signs of wear and tear. Regularly cleaning them can extend their lifespan.
Yes, the vacuum is suitable for hardwood floors. Use the appropriate attachment to prevent scratching and optimize cleaning performance.
Store the vacuum in a dry place, and ensure the power cord is neatly wound to avoid damage. Keep all attachments together to prevent loss.
Check if the vacuum is properly plugged in and that the outlet is functioning. Inspect the power cord for damage and ensure the power switch is in the 'on' position.
Regularly empty the dust container, clean or replace filters, check for blockages in hoses and attachments, and inspect the power cord for any damage.
Yes, the Sencor SVC 45BK-EUE3 is effective at removing pet hair, especially when using the appropriate brush attachment designed for pet hair.
To change accessories, turn off the vacuum and disconnect it from the power source. Detach the current accessory by pressing the release button and attach the new one until it clicks into place.
If the vacuum overheats, turn it off immediately and unplug it. Check for any blockages and clean the filters. Allow the vacuum to cool down for at least 30 minutes before using it again.