Sencor SVC 3001 User Manual

To clean the dust container, remove it from the vacuum cleaner, empty its contents into a trash bin, and rinse it with warm water. Allow it to dry completely before reinstalling.
First, check if the dust container is full and empty it if necessary. Next, inspect the filter for clogs and clean or replace it. Also, ensure there are no blockages in the hose or nozzle.
Filters should be cleaned every 3 months and replaced every 6-12 months, depending on usage frequency and manufacturer recommendations.
The Sencor SVC 3001 is suitable for cleaning carpets, rugs, hardwood floors, and tile surfaces. Ensure the appropriate attachment is used for each surface type.
Check if the power cord is properly plugged into a functional outlet. Inspect the cord for damage. If the issue persists, consult an authorized service center.
Regularly clean and replace filters, empty the dust container after each use, check for obstructions, and store the vacuum in a dry, safe place.
Disconnect the vacuum from the power source, turn the brush head counterclockwise to detach it, and replace it with the new one by twisting it clockwise until secure.
The Sencor SVC 3001 is not designed for wet vacuuming. Using it on liquid spills may damage the appliance. Consider using a specialized wet-dry vacuum for liquids.
Turn off the vacuum cleaner and unplug it from the outlet. Allow it to cool down for at least 30 minutes before checking for blockages or a full dust container.
After use, wrap the power cord neatly around the designated hooks, remove any attachments, empty the dust container, and store the vacuum upright in a dry environment.