Sencor SUB 0700BE User Manual
![Sencor SUB 0700BE Foot Warmer manual cover](/images/TJiXFlOLwgDDEcamOwOcArhA/thumbs/thumb175x175.webp)
To clean your Sencor SUB 0700BE Foot Warmer, first ensure it is unplugged and completely cool. Gently wipe the surface with a damp cloth. Avoid using any abrasive cleaners or submerging the unit in water.
Check that the foot warmer is properly plugged into a working outlet. Ensure the power switch is turned on. If it still doesn't heat, the internal fuse may need replacement, which should be handled by a professional technician.
No, you should not use the foot warmer with wet feet. Make sure your feet are dry before use to prevent any electrical hazards and ensure effective warming.
It is recommended to use the foot warmer for sessions no longer than 60 minutes at a time to prevent overheating and to allow the device to cool down between uses.
The Sencor SUB 0700BE Foot Warmer has a power consumption of approximately 100 watts.
Yes, it is normal for new appliances to emit a slight odor upon first use. This should dissipate after a few uses. Ensure adequate ventilation during the initial uses.
It is not recommended to use an extension cord with the foot warmer. Plug it directly into a wall outlet to ensure safe operation and prevent potential overheating.
Allow the foot warmer to cool completely before storing. Store it in a dry place, preferably in its original packaging or a storage bag to protect it from dust and damage.
The foot warmer includes an automatic shut-off feature after 60 minutes of use, and it has overheat protection to ensure safe operation.
If you have sensitive skin, use the foot warmer with caution. Start with the lowest heat setting and monitor your skin's reaction. Consult with a healthcare professional if you have any concerns.