Sencor SRC 150 R User Manual
![Sencor SRC 150 R Radio manual cover](/images/LQOchyOrZNVQfjwDTHBKHriN/thumbs/thumb175x175.webp)
To set the alarm, press the 'Alarm' button until the alarm time appears on the display. Use the 'Hour' and 'Minute' buttons to set the desired time, then press 'Alarm' again to confirm.
Ensure that the power cord is securely plugged into an outlet and the radio. Check that the outlet is working by testing another device. If the problem persists, try using a different outlet.
Extend the FM antenna fully and reposition it for the best reception. Avoid placing the radio near electronic devices that may cause interference.
Press and hold the 'Time' button until the time format begins to flash. Use the 'Hour' button to toggle between 12-hour and 24-hour formats, then press 'Time' again to confirm.
Press the 'Snooze' button repeatedly to cycle through different brightness settings until the desired level is reached.
Unplug the radio from the power source, wait for a few minutes, and then plug it back in. This should reset the radio to its factory defaults.
Press the 'Sleep' button repeatedly to set the desired sleep duration (from 10 to 90 minutes). The radio will turn off automatically after the set time.
Check if the backup battery is installed correctly and replace it if necessary. A failing battery can cause timekeeping issues.
Yes, you can connect headphones to the radio using the headphone jack located on the side or back of the unit.
Press the 'Tuning' button to manually adjust the frequency until you reach the desired station. Hold the button for faster tuning.