Sencor SPT 6500 User Manual
![Sencor SPT 6500 Boombox manual cover](/images/EzzUZWtwRBeOnytjyqpuNzTj/thumbs/thumb175x175.webp)
To connect a Bluetooth device, turn on the boombox and press the Bluetooth button until the Bluetooth indicator starts flashing. On your device, enable Bluetooth and search for available devices. Select 'Sencor SPT 6500' from the list to pair.
Ensure that the power cord is securely connected to both the boombox and a functioning power outlet. Check the power switch and try using a different outlet. If using batteries, ensure they are inserted correctly and have sufficient charge.
Extend the FM antenna fully and adjust its position for better reception. Try repositioning the boombox closer to a window or in an area with fewer obstructions.
Yes, insert the USB flash drive into the USB port. Press the 'USB' button on the boombox to switch to USB mode, and playback will begin automatically.
Check if the CD is placed correctly with the label side up. Ensure the disc is clean and free from scratches. Try another disc to see if the issue persists. If the problem continues, the lens may need cleaning.
To reset to factory settings, turn off the boombox and disconnect it from the power source. Wait a few minutes, then reconnect and power it on. This will reset most settings to default.
Press the 'Clock' button, then use the 'Skip' buttons to set the hour and minute. Press 'Clock' again to confirm the time.
Use a soft, dry cloth to clean the exterior. Avoid using harsh chemicals or abrasive materials. Ensure that the device is unplugged from the power source before cleaning.
Press the 'Source' button repeatedly to cycle through available audio sources such as CD, USB, Bluetooth, and FM radio.
Check the volume level and ensure it is not muted. Verify that the correct audio source is selected. Inspect connections and cables if using an auxiliary input.