Sencor SPE 4110BL User Manual
![Sencor SPE 4110BL Callus Remover manual cover](/images/lKQLGZFVjgziwluYdSwxwYcl/thumbs/thumb175x175.webp)
To clean the Sencor SPE 4110BL Callus Remover, first ensure the device is turned off and removed from any power source. Detach the roller head and wash it under running water. Use a damp cloth to wipe the main unit. Ensure all parts are completely dry before reassembly.
If the Sencor SPE 4110BL stops working, first check if the batteries need replacement or if the device needs recharging. Ensure the roller head is properly attached and free of obstructions. If problems persist, consult the user manual or contact customer support.
The Sencor SPE 4110BL is designed for use on dry skin only. Using it on wet skin may reduce its effectiveness and could potentially damage the device.
It is recommended to replace the roller head every 3 to 6 months, depending on usage frequency. If the roller head shows signs of wear or decreased effectiveness, consider replacing it sooner.
Store the Sencor SPE 4110BL in a dry, cool place away from direct sunlight. Ensure the device is turned off and the roller head is clean and dry before storage.
For hygiene reasons, it is recommended that each user have their own roller head. The main unit can be shared if properly cleaned between uses.
Turn off the device and carefully remove the roller head. Clean any debris or buildup that may be causing the jam. Reattach the roller head securely before turning the device back on.
Yes, you can use rechargeable batteries with the Sencor SPE 4110BL. Ensure they are fully charged before use for optimal performance.
If the device is not effective, check if the roller head needs replacement. Ensure the device is fully charged or has fresh batteries. Adjust the pressure applied during use for better results.
Each session with the Sencor SPE 4110BL should not exceed 10-15 minutes per foot. Prolonged use can cause skin irritation. Use the device gently and check your skin's condition regularly during use.