Sencor SOH 4007BE User Manual
![Sencor SOH 4007BE Radiator manual cover](/images/RMapthlTcoXApmQoaAgmzNSJ/thumbs/thumb175x175.webp)
To turn on the Sencor SOH 4007BE Radiator, plug it into a power outlet and switch the power button to the 'on' position. Use the control dial to set the desired temperature.
Ensure the radiator is plugged in and the power switch is turned on. Check if the thermostat is set to a temperature higher than the current room temperature. If it still doesn't heat, contact customer support.
Turn off and unplug the radiator. Use a soft, damp cloth to wipe the exterior. Do not use any abrasive cleaners or immerse the unit in water. Allow it to dry completely before using again.
Yes, the Sencor SOH 4007BE Radiator is designed for safe operation, but it is recommended to follow all safety instructions, keep it away from flammable materials, and ensure it is on a stable surface.
Some noise is normal as the oil inside the radiator heats up and circulates. If the noise is excessive, ensure the radiator is on a level surface and check for any loose components.
Use the control dial on the radiator to set your desired temperature level. The thermostat will regulate the heat output to maintain the set temperature.
Routinely clean the exterior and ensure the power cord and plug are in good condition. Periodically inspect the radiator for any signs of damage or wear.
Turn off, unplug, and let the radiator cool down. Clean it and store it in a dry, dust-free environment, preferably in its original packaging or covered to prevent dust accumulation.
It is not recommended to use an extension cord with the radiator due to the risk of overheating. If necessary, use a high-quality, heavy-duty extension cord.
The radiator has a tip-over switch that will automatically shut it off if it tips over. Set it upright on a flat surface and turn it back on. Ensure the area is clear of obstructions.