Sencor SKS 6501WH User Manual

The Sencor SKS 6501WH scale is factory calibrated and does not require manual calibration. However, ensure the scale is on a flat, stable surface for accurate measurements.
To switch measurement units, press the "Unit" button on the scale until your desired unit (grams, ounces, pounds, etc.) is displayed.
If an error message appears, reset the scale by removing the batteries and reinserting them after a few minutes. Make sure the scale is on a stable surface and try again.
To replace the batteries, open the battery compartment on the underside of the scale, remove the old batteries, and insert new ones, respecting the polarity.
It is not recommended to use the scale on a carpet as it may affect accuracy. Use a flat, hard surface for best results.
Clean the scale with a soft, damp cloth. Avoid using harsh chemicals or submerging the scale in water to prevent damage.
The scale has an auto-off feature to conserve battery life. It will turn off after a period of inactivity.
The Sencor SKS 6501WH scale has a maximum weight capacity of 5 kilograms (11 pounds).
To use the tare function, place an empty container on the scale and press the "Tare" button. The display will reset to zero, allowing you to measure the contents separately.
Ensure the batteries are correctly installed and not depleted. If the problem persists, try replacing the batteries with new ones.