Sencor SKS 4001WH User Manual
![Sencor SKS 4001WH Scale manual cover](/images/KjZAzQtstXVKetECSvJTrVCx/thumbs/thumb175x175.webp)
To calibrate the Sencor SKS 4001WH scale, place it on a flat, hard surface, and press the power button to turn it on. Wait for the scale to display zero, then press the calibration button, if available, and follow the instructions in the user manual.
If the scale shows an error message, ensure that it is on a stable surface, and check the batteries. If the problem persists, consult the troubleshooting section of the user manual for further guidance.
To change the unit of measurement, press the unit button on the scale until your desired unit (grams, ounces, etc.) is displayed.
To clean the scale, use a soft, damp cloth to wipe the surface. Avoid using harsh chemicals or submerging the scale in water. Regular maintenance includes checking the battery compartment for corrosion and ensuring the scale is stored in a dry place.
If the scale does not turn on, check if the batteries are properly installed and have sufficient charge. Replace the batteries if necessary and ensure the battery compartment is clean.
Yes, you can weigh items directly on the scale platform. However, for items that might spill or are not stable, it is advisable to use a container and use the tare function to zero the weight of the container.
To use the tare function, place an empty container on the scale and press the tare button. The display will reset to zero, allowing you to measure the weight of the contents only.
The Sencor SKS 4001WH scale has a maximum weight capacity of 5 kilograms or 11 pounds. Exceeding this limit may damage the scale.
Yes, the scale can measure liquids, but it is important to use a container and the tare function to ensure accurate measurement.
To ensure accuracy, regularly calibrate the scale, replace the batteries when low, and avoid placing the scale in areas with extreme temperature fluctuations or humidity.