Sencor SHB 4358WH-EUE3 User Manual

To assemble the Sencor SHB 4358WH-EUE3 Blender, first attach the blending shaft to the motor unit by aligning the arrows and twisting until it clicks into place. Ensure all parts are securely connected before use.
If the blender does not start, ensure it is plugged in securely and that the power outlet is functioning. Check that all components are properly assembled and the safety lock is engaged.
To clean the blender, detach the blending shaft and rinse it under warm water. Use mild detergent if necessary. Wipe the motor unit with a damp cloth. Never immerse the motor unit in water.
Regularly check for wear and tear on the components, especially the blades. Clean the blender after each use and ensure it is dry before storing. Store the appliance in a dry place away from direct sunlight.
The blender can crush ice in small quantities. It is recommended to add a small amount of liquid to aid blending and prevent motor strain.
If the blades become dull, it is advisable to replace them with new ones to maintain optimal performance. Contact Sencor customer service for replacement parts.
To prevent overheating, do not operate the blender continuously for more than 1 minute. Allow the motor to cool down between uses and avoid blending extremely hard substances without liquid.
Store the blender in a dry, cool place. Detach the blending shaft from the motor unit and store them separately. Ensure all parts are clean and dry before storing.
Unusual noises may indicate a problem with the assembly or motor. Turn off the blender, disassemble and reassemble the components ensuring they are properly connected. If the issue persists, contact customer service.
The detachable parts such as the blending shaft are dishwasher safe. However, the motor unit should never be placed in the dishwasher. Refer to the user manual for detailed cleaning instructions.