Sencor SFR 3130BK User Manual
![Sencor SFR 3130BK Fryer manual cover](/images/RoKCnwnIzigRbPjEyfeITMqU/thumbs/thumb175x175.webp)
To clean the Sencor SFR 3130BK Fryer, first ensure it is unplugged and completely cooled down. Remove the frying basket and wash it with warm soapy water. Wipe the exterior with a damp cloth. The interior can be cleaned with a non-abrasive sponge. Ensure all parts are dry before reassembling.
If the fryer doesn't heat up, check the power connection and ensure the outlet is working. Verify that the temperature control is set correctly. If the issue persists, consult the user manual or contact Sencor customer support for assistance.
To prevent food from sticking, lightly coat the basket with a small amount of cooking oil before placing food inside. Additionally, avoid overloading the basket to ensure proper air circulation.
The recommended cooking time for frozen fries in the Sencor SFR 3130BK Fryer is typically 15-20 minutes at 200°C (392°F). Shake the basket halfway through cooking for even results.
Yes, the Sencor SFR 3130BK Fryer can be used without oil for air frying, which uses hot air to cook food, making it a healthier alternative to traditional frying.
The Sencor SFR 3130BK Fryer has a maximum food capacity of approximately 3 liters or 1.2 kilograms. Do not exceed this limit to ensure optimal cooking performance.
Smoke can occur if excess oil is used or if food residue is present in the basket or pan. Ensure the fryer is clean and avoid using too much oil. Adjust the temperature if needed.
For even cooking, do not overcrowd the basket, shake or stir the food halfway through the cooking process, and ensure food pieces are uniform in size.
If a burning smell is detected, immediately turn off and unplug the fryer. Check for any food residue or oil buildup and clean thoroughly. If the smell persists, contact customer support.
Ensure the fryer is completely clean and dry before storage. Store it in a cool, dry place and keep the cord wrapped neatly to avoid damage. Remove any detachable parts and store them separately if possible.