Sencor SES 9210WH User Manual
![Sencor SES 9210WH Coffee Maker manual cover](/images/BvaXipgOylfJgzILaWjUZROx/thumbs/thumb175x175.webp)
To descale the coffee maker, fill the water tank with a descaling solution and run the machine without coffee grounds. Follow the manufacturer's recommendations on the frequency of descaling based on water hardness.
Ensure the machine is plugged in and the power switch is turned on. Check the power outlet by testing another device. If the problem persists, consult the user manual or contact customer support.
Use the strength control feature on the machine to customize the intensity of your coffee. Refer to the user manual for detailed instructions on adjusting strength settings.
Check the water reservoir for proper placement and ensure all seals and gaskets are intact. Inspect the drip tray and clean any blockages. If leaking persists, contact customer service.
Detach the nozzle and soak it in warm, soapy water. Use a small brush to remove any milk residue. Rinse and dry thoroughly before reattaching. Perform regular cleaning to maintain hygiene.
Unusual noises could indicate a blockage or the need for descaling. Ensure all parts are correctly assembled and clean. If the noise continues, refer to the manual or seek technical assistance.
To reset the machine, turn it off and unplug it. Hold down the reset button, if available, for a few seconds. Consult the manual for specific reset instructions based on your model.
Ensure you are using the correct coffee-to-water ratio and that the strength setting is appropriately adjusted. Check if the coffee grounds are fresh and of the right grind size.
Regular maintenance includes descaling every 2-3 months, cleaning the milk frother weekly, and wiping down the machine after each use. Refer to the user manual for a comprehensive maintenance guide.
While you can use various types of coffee grounds, for optimal performance, use medium grind coffee suitable for automatic coffee machines. Avoid very fine or coarse grinds.