Sencor SES 7018BK User Manual
![Sencor SES 7018BK Coffee Maker manual cover](/images/BOihvIuVIOcUsDJPQfCCSgUA/thumbs/thumb175x175.webp)
To descale the Sencor SES 7018BK, fill the water tank with a descaling solution according to the manufacturer's instructions. Run a descaling cycle as described in the user manual, followed by a couple of cycles with clean water to rinse.
Check if the coffee maker is properly plugged into a working electrical outlet. Ensure that the power switch is turned on. If the problem persists, inspect the power cord for any damage.
Detach the milk frother and rinse it with warm water after each use. For a deeper clean, disassemble the frother components and soak them in warm soapy water, then rinse and dry thoroughly before reassembling.
Ensure that the water tank is filled and the machine is fully preheated before brewing. If the issue persists, the heating element might need inspection or the machine might require descaling.
To adjust the coffee strength, use the strength selection button on the control panel. Choose between options for mild, medium, or strong coffee, depending on your preference.
Use medium-fine coffee grounds for optimal results. Avoid using too fine or too coarse grounds, as they can affect the flavor and brewing process.
Ensure that the water tank is properly seated and not overfilled. Check for any blockages in the drip tray or spout. Inspect the seals and gaskets for wear and replace if necessary.
Yes, the Sencor SES 7018BK has a programmable timer feature. Refer to the user manual for detailed instructions on setting the automatic start time.
Regularly clean the drip tray, water tank, and coffee grounds container. Descale the machine as needed and clean the milk frother after each use to maintain optimal performance.
Use fresh, high-quality coffee beans and ensure proper grinding. Regularly clean and maintain the coffee maker to prevent build-up that can alter taste. Adjust the coffee strength and water ratio to your preference.