Sencor SES 7015CH User Manual

To descale your Sencor SES 7015CH, fill the water tank with a descaling solution and water as per the instructions. Run the machine without coffee grounds, repeating if necessary, then rinse by running clean water through the system.
First, check if the coffee maker is properly plugged in and that the outlet is functional. If the problem persists, inspect the power cord for damage and consult the manual for any specific reset instructions.
Detach the milk frother and rinse it under warm water after each use. For a thorough clean, soak it in warm soapy water, then rinse and dry. Ensure all milk residue is removed to prevent blockage.
Ensure the coffee maker is preheated before brewing. Check that the water tank is filled and the machine is not in need of descaling, which can affect temperature performance.
To adjust coffee strength, use the settings menu to select your desired strength level. This changes the amount of coffee grounds used per cup. Refer to the manual for detailed instructions.
Make sure the coffee maker is turned off and unplugged. Clean all removable parts, let them dry completely, then store the machine in a cool, dry place away from direct sunlight.
Unusual noises can be due to blockages or the need for descaling. Ensure the machine is clean and free of debris. If the issue continues, consult the user manual or contact customer support.
It is recommended to replace the water filter every two months or after approximately 60 uses, whichever comes first, to ensure optimal performance and taste.
Yes, you can use pre-ground coffee by selecting the relevant setting on your coffee maker. Refer to the manual for instructions on how to adjust the settings for pre-ground coffee.
Ensure the coffee maker is clean and descaled. Check the freshness and quality of the coffee beans or grounds. Try adjusting the grind size and experiment with different water to coffee ratios.