Sencor SCT 5051BMR User Manual
![Sencor SCT 5051BMR Radio manual cover](/images/eoXUMFUhwMxDENWownbKWEXp/thumbs/thumb175x175.webp)
To pair your Sencor SCT 5051BMR Radio with a Bluetooth device, turn on the radio and activate Bluetooth mode. On your Bluetooth device, search for available devices and select 'SCT 5051BMR'. Confirm pairing if prompted.
If the radio does not power on, check if the power cable is connected properly and the outlet is functioning. If using batteries, ensure they are inserted correctly and are not depleted.
To improve FM radio reception, extend the antenna fully and adjust its position. Avoid obstacles that may block signals and try changing the location of the radio.
Press the 'Clock' button and use the 'Tuning' dial to set the hour. Press 'Clock' again and adjust the minutes using the 'Tuning' dial. Confirm the time setting by pressing 'Clock' once more.
To reset the Sencor SCT 5051BMR to factory settings, turn off the radio and press and hold both the 'Power' and 'Preset' buttons simultaneously until the display indicates a reset.
Connect one end of a 3.5mm audio cable to the AUX input on the radio and the other end to the headphone jack of your external device. Select 'AUX' mode on the radio to begin playback.
If the sound is distorted, check the volume level and reduce it if necessary. Ensure all cables are connected properly and inspect speakers for damage. Adjust the equalizer settings if available.
Tune to the desired radio station, then press and hold the 'Preset' button until the preset number flashes. Use the 'Tuning' dial to select a preset number and press 'Preset' again to save.
To clean the radio, use a soft, dry cloth to wipe the exterior. Avoid using harsh chemicals or water. Regularly check cables and connections to ensure they are secure and free from damage.
Ensure that your Bluetooth device is within range and that there are no obstacles blocking the signal. Try repairing the devices and check for any software updates for both the radio and your Bluetooth device.