- 5 - 08/2019 Copyright 2019, Fast R, a.s.
EN Food Chopper User's manual
Prior to using this appliance, please read the users manual thoroughly, even in cases, when one has already familiarised themselves with previous use of similar types of appliances. Only use the appliance in the manner described in this users manual. Keep this users manual in a safe place where it can be easily retrieved for future use.
We recommend saving the original cardboard box, packaging material, purchase receipt and responsibility statement of the vendor or warranty card for at least the duration of the legal liability for unsatisfactory performance or quality. In the event of transportation, we recommend that you pack the appliance in the original box from the manufacturer.
DESCRIPTION OF THE APPLIANCE A1 Pulse button
for turning the motor unit on and off
A2 Motor unit A3 Lid
A4 Blade assembly with four titanium coated chopping blades
A5 1-litre glass bowl A6 Anti-slip ring
BEFORE FIRST USE Take the appliance and its accessories out of the packaging
materials. Wash the lid A3, blade assembly A4, bowl A5 and anti-slip ring
A6 in warm water using kitchen detergent. Then rinse with clean water and allow it to dry naturally or dry it out using a wiping cloth.
Note: The parts listed above, excluding the blade assembly A4, are suitable for washing in a dishwasher.
Attention: When cleaning the blade assembly A4, be very careful not to injure yourself on its sharp edges.
Never wash the motor unit A2 under running water or submerge it in water.
ASSEMBLING AND DISASSEMBLING THE APPLIANCE Before you start assembling or disassembling the appliance,
check that the motor unit A2 is turned off and disconnected from the power socket and that the rotating parts have come to a complete stop.
Place the anti-slip ring A6 on to a dry, even and stable surface and put the bowl A5 into it.
Now assemble the blade assembly A4. It consists of two parts, the top and bottom chopping blades. Hold the top chopping blades by the middle part and seat them on to the bottom chopping blades from above, and then turn them in one direction or the other so that both parts fit into each other. For a firm connection of both parts, hold the bottom chopping blades with one hand and use the other hand to hold the top chopping blades and turn them anticlockwise until they lock into place.
Attention: When handling the chopping blades, be very careful not to injure yourself on their sharp cutting edges. Only touch the plastic central part of the chopping blades.
Put the assembled blade assembly A4 on to the central pin at the bottom of the bowl A5, and put the lid A3 on to the bowl A5. The shape of the lid enables it to be seated in only one direction. Push the lid A3 down so that it adheres to the edge of the bowl A5 along its entire perimeter.
Attention: When handling the the blade assembly A4, be very careful not to injure yourself on its sharp edges. Always hold the blade assembly by its central part.
Put the motor unit A2 on to the lid A3 so that it fits in properly. Now the appliance is assembled.
To disassemble, proceed in reverse sequence.
OPERATING THE APPLIANCE Assemble the chopper according to the instructions in the
chapter Assembling and disassembling the appliance. Put the ingredients into it after seating the blade assembly A4 on the central pin at the bottom of the bowl A5. Do not fill the bowl A5 above the maximum mark (1 l).
Connect the power cord to a power socket and press the pulse button A1 to start the chopper. Hold down button A1 for a few moments and then release it. When the button A1 is released, the chopper will stop. If the food inside is not sufficiently chopped up, run the chopper again for a short time. Short pulse switching will limit excessive pulverisation of the food. Hold the bowl A5 with one hand during operation.
Attention: The maximum continuous operating time of the appliance is 20 seconds. Then allow it to cool down for 2 minutes.
If food is sticks to the inside of the bowl A5, turn off the chopper and disconnect it from the power socket. Make sure that the blade assembly A4 has stopped rotating. Remove the motor unit A2 and the lid A3. Clean the inside of the bowl A5 using a spatula. Assemble the chopper, plug the power cord into a power socket and continue processing food.
When you finish using it, disconnect the power cord from the power socket. Make sure that the blade assembly A4 has stopped rotating. Remove the motor unit A2 and the lid A3. First, carefully take the blade assembly A4 out of the bowl A5 and only then empty out its contents.
Then clean all used parts according to the instructions in chapter Cleaning and maintenance.
QUICK GUIDE TO PROCESSING INGREDIENTS First, cut up the food into smaller cubes of approximately
2 2 cm and only then process with the chopper. With vegetables like onion, it is sufficient to cut them into quarters.
Ingredients Maximum load
Total processing time
Meat 300 g 20 s
Fruit and vegetables 200 g 15 s
Hard and semi-hard cheeses 150 g 10 s
Nuts with shells removed 100 g 15 s
Herbs 50 g 10 s
Note: The above food processing times are only a reference. The actual processing time depends on the size of the ingredients, their amount and the required final consistency.
en
en