Scion xB TVIP V5 RS3200 Plus 2006 Owner's Guide
![Scion xB TVIP V5 RS3200 Plus 2006 Hatchback manual cover](/images/TrNnoEXRlsrrdHhffdArLpSW/thumbs/thumb175x175.webp)
To activate the TVIP V5 RS3200 Plus system, close all doors and use the key fob to lock the vehicle. The system will arm within 30 seconds, indicated by the blinking security light on the dashboard.
If the alarm is triggered accidentally, use the key fob to unlock the vehicle or insert the key into the ignition and turn it on. This will disarm the system and stop the alarm.
If the key fob is not working, first replace the battery. Ensure the key fob is within range and try re-synchronizing it with the vehicle by pressing the lock and unlock buttons simultaneously near the car.
Regularly check the key fob battery and replace it as needed. Inspect the system's wiring and connections for any signs of wear or corrosion, and consult the owner's manual for any specific maintenance tasks.
To temporarily disable the alarm system, use the valet mode. Insert the key into the ignition, turn it to the 'ON' position, and press the valet switch (usually located under the dashboard) until the security light turns off.
Check for the security indicator light on the dashboard, which should blink when the system is armed. Additionally, consult your vehicle's manual or check with a dealership to confirm the presence of the RS3200 Plus system.
The RS3200 Plus system provides features such as remote keyless entry, panic alarm, and enhanced vehicle security with a glass breakage sensor and automatic re-locking.
Yes, additional sensors, such as glass breakage or motion sensors, can be added to the RS3200 Plus system. Consult with a professional installer to ensure compatibility and proper installation.
If the security light does not blink, ensure all doors, including the trunk, are properly closed. If the issue persists, check the vehicle's fuse box for any blown fuses related to the security system.
To reset the system, disconnect the vehicle's battery for a few minutes. Reconnect the battery, and the system should reset. Note that this may also reset other electronic settings in the vehicle.