Scion xB TVIP V4 Remote Engine Starter 2008 Owner's Guide

To program your remote engine starter, insert the key into the ignition and turn it to the 'on' position. Press and hold the programming button located under the dashboard until the LED light flashes. Then, press the lock button on your remote.
Check if the remote's battery is functional and replace it if necessary. Ensure that your vehicle's battery is fully charged and check all fuses related to the remote starter.
Yes, the remote starter system allows you to adjust the runtime duration. Refer to the user manual to access the settings mode and change the duration based on your preference.
The TVIP V4 Remote Engine Starter is compatible with the 2008 Scion xB model. It's recommended to check with your dealer for any specific compatibility concerns.
Regularly check the battery of the remote and replace it as needed. Inspect the wiring and connections periodically to ensure they are secure and free of corrosion.
This could be due to the hood not being fully closed or a faulty hood switch. Ensure the hood is latched properly and inspect the hood switch for any issues.
To temporarily disable the remote starter, locate the system's override switch under the dashboard and toggle it to the 'off' position.
No, for safety reasons, the remote starter will only activate when the vehicle is in 'Park' or 'Neutral'. Ensure your vehicle is in the correct gear before using the remote starter.
Yes, extreme temperatures can affect battery performance and signal range. Ensure your remote's battery is fresh and consider proximity to the vehicle during use.
Start by replacing the remote battery and checking the vehicle's battery and fuses. If the problem persists, consult with a professional technician to diagnose potential issues with the system.