Scheppach HMS850 5902205903 Instruction Manual

Scheppach HMS850 5902205903 Planing Machine manual cover

Pages 44

Year 2017

Language(s)

of 44

Scheppach HMS850 5902205903 Planing Machine Specification

The Scheppach HMS850 5902205903 Planing Machine is a robust and versatile tool designed for woodworking enthusiasts and professionals seeking precision and efficiency. This compact yet powerful machine features a 1250-watt motor, providing ample power for planing and thicknessing tasks. The planing width is set at 204 mm, allowing for substantial coverage in a single pass. The thicknessing capacity ranges from 5 to 120 mm in height, accommodating a wide variety of wood sizes.

The cutting system includes two high-quality blades that operate at 8500 revolutions per minute, ensuring a smooth and clean finish on all types of wood surfaces. The feed rate is approximately 6 meters per minute, facilitating quick processing of materials. The cast iron planing table ensures stability and precision, while the foldable extension tables provide additional workspace for larger projects. The machine also includes a dust extraction port, which helps maintain a clean working environment by efficiently removing wood shavings and dust particles.

The Scheppach HMS850 is designed with user safety and convenience in mind, featuring a safety switch to prevent accidental starts and an easily adjustable depth control for accurate material removal. The compact design and lightweight construction make it easy to transport and store, while its solid build ensures long-lasting durability. Ideal for both hobbyists and professional workshops, this planing machine delivers consistent performance and precise results, enhancing productivity and craftsmanship in woodworking projects.

Scheppach HMS850 5902205903 Planing Machine F.A.Q.

How do I properly set up the Scheppach HMS850 for the first time?

To set up the Scheppach HMS850, first ensure it is placed on a stable, level surface. Attach the dust extraction port and connect it to a dust collector. Adjust the infeed and outfeed tables to be parallel to the cutter head. Finally, plug the machine into a power source, making sure the switch is in the off position before turning it on.

What should I do if the machine does not start?

If the Scheppach HMS850 does not start, first check that it is plugged in and that the outlet is working. Verify that the power switch is functioning and examine the fuse or circuit breaker. If the problem persists, inspect the motor for overheating or damage and consult the user manual for further troubleshooting steps.

How often should I sharpen the blades of the HMS850?

Blade sharpening frequency depends on usage. For average use, inspect and potentially sharpen the blades every few months. If you notice poor cutting performance or increased resistance during planing, it's time to sharpen or replace the blades.

What maintenance is required to keep the HMS850 in good working condition?

Regular maintenance includes cleaning the machine after each use to remove sawdust and debris. Lubricate moving parts as recommended in the manual. Periodically check and tighten all bolts and screws, and inspect the power cord for any damage.

How can I prevent snipe when using the HMS850 planer?

To minimize snipe, ensure the infeed and outfeed tables are perfectly aligned and support the workpiece as it enters and exits the planer. Additionally, consider making light passes with the planing machine and using sacrificial boards at the start and end of your workpiece.

Why is the planing surface rough and how can I improve it?

A rough planing surface can result from dull blades or incorrect feed speed. Ensure the blades are sharp and set at the correct height. Adjust the feed rate to a slower speed for a smoother finish. Check the alignment of the blades and tables as well.

What should I do if the machine vibrates excessively during operation?

Excessive vibration could be due to an unbalanced cutter head, loose components, or an unstable work surface. First, check that the machine is on a stable surface and that all bolts and screws are tightened. Inspect the cutter head for balance and secure all parts properly.

How do I replace the blades on the Scheppach HMS850?

To replace the blades, first, unplug the machine. Remove the blade guard and use the provided tool to loosen the blade locking screws. Carefully remove the old blades, install the new ones ensuring they are properly aligned, and securely tighten the locking screws. Reattach the blade guard before use.

Can I use the HMS850 for hardwoods?

Yes, the Scheppach HMS850 can be used for planing hardwoods. However, it is essential to ensure the blades are sharp to handle the denser material and to take lighter passes to avoid overloading the machine.

What safety precautions should I take when using the HMS850?

Always wear safety goggles and hearing protection. Keep hands away from the cutter head and use push sticks when necessary. Ensure the work area is clean, and never leave the machine running unattended. Familiarize yourself with the emergency stop procedures as detailed in the manual.