Scheppach HMS850 5902204901 Instruction Manual

Scheppach HMS850 5902204901 Planing Machine manual cover

Pages 188

Year 2015

Language(s)

of 188

Scheppach HMS850 5902204901 Planing Machine Specification

The Scheppach HMS850 5902204901 Planing Machine is a high-performance tool designed for precision woodworking. It combines a robust build with user-friendly features, making it ideal for both amateur and professional woodworkers. The machine is powered by a 1250W motor that ensures efficient material removal and smooth planing surfaces. Its planing width capacity is set at 204 mm, allowing for a substantial working range, while the maximum material thickness that it can handle is 120 mm. The HMS850 features a two-knife cutter head that operates at a speed of 8500 RPM, ensuring clean and accurate cuts with every pass.

The machine is designed with an adjustable aluminum fence, providing stability and precision during operation. It allows for precise angle adjustments, enhancing versatility for complex tasks. The planing table is constructed from durable cast iron, providing a stable platform that minimizes vibrations and enhances cutting precision. The feed rate is set at 6 m/min, optimizing the balance between speed and cutting efficiency.

Safety is a priority with the Scheppach HMS850, featuring a circuit breaker and a dust extraction port that helps maintain a clean working environment. The compact design and integrated handles facilitate easy transport and storage. Overall, the Scheppach HMS850 5902204901 Planing Machine is engineered for reliability and performance, making it a valuable addition to any woodworking workshop.

Scheppach HMS850 5902204901 Planing Machine F.A.Q.

How do I properly set up the Scheppach HMS850 for the first use?

To set up the Scheppach HMS850, begin by assembling the base and securing it on a flat surface. Ensure all screws and bolts are tightened. Connect the dust extraction system and check the power supply. Follow the manual for detailed assembly instructions.

What is the correct way to adjust the cutting depth on the HMS850?

To adjust the cutting depth, use the depth adjustment knob located near the infeed table. Rotate the knob until the desired depth is displayed on the scale. Always ensure the machine is off while making adjustments.

How can I troubleshoot uneven cutting results with the HMS850?

If you experience uneven cuts, check the alignment of the infeed and outfeed tables. Ensure both tables are parallel to each other and the cutter head. Also, verify that the blades are sharp and correctly installed.

What maintenance tasks should be performed regularly on the HMS850?

Regular maintenance includes cleaning the machine after each use, checking and tightening bolts, lubricating moving parts, and inspecting the blades for sharpness and damage. Replace or sharpen blades as needed.

How do I replace the blades on the Scheppach HMS850?

To replace the blades, first disconnect the power. Remove the blade guard and loosen the blade locking screws. Carefully remove the old blades and install new ones, ensuring they are aligned correctly. Tighten the screws securely and replace the guard.

What safety precautions should I take while using the HMS850?

Always wear safety goggles and hearing protection. Keep loose clothing and hair away from the machine. Ensure the workpiece is properly supported and use push sticks or pads to avoid hand injuries. Never adjust the machine while it's running.

How can I improve the dust collection efficiency on the HMS850?

To enhance dust collection, ensure the dust port is securely connected to a high-quality dust extraction system. Regularly check for clogs in the dust chute and clean them promptly. Consider using a larger diameter hose for better airflow.

Why is my HMS850 vibrating excessively during operation?

Excessive vibration may be caused by an unbalanced cutter head or loose parts. Check that all bolts are tight and inspect the cutter head for balance issues. If necessary, reposition or replace the blades.

What should I do if the HMS850 motor overheats?

If the motor overheats, turn off the machine immediately and let it cool down. Check for proper ventilation around the motor and ensure the air vents are not blocked. If the problem persists, consult a professional technician.

How can I align the infeed and outfeed tables on the HMS850?

To align the tables, use a straightedge across both tables to check for dips or rises. Adjust the table height using the adjustment screws until both tables are perfectly parallel. Ensure the machine is off during this process.