Scheppach BCH3300-40Li 5910902900 Instruction Manual
![Scheppach BCH3300-40Li 5910902900 Trimmer manual cover](/images/rgGhsAKWeKbxNcUWaUMJRdrZ/thumbs/thumb175x175.webp)
Ensure the battery is fully charged and properly inserted. Press the safety switch and then squeeze the trigger to start the trimmer.
Check if the line spool is properly installed. Make sure the line is not tangled or too short. Replace the line if necessary.
Remove the battery and use a soft brush to clean debris from the cutting head and vents. Avoid using water or harsh chemicals.
This may occur if the battery is low. Check the battery charge level and recharge if necessary. Also, inspect for any blockages in the cutting head.
Clean the trimmer after each use, inspect the line spool regularly, and ensure the battery is charged and stored correctly. Check for loose or damaged parts monthly.
It is recommended to use the trimmer line specified in the user manual to ensure optimal performance and avoid damaging the trimmer.
Remove the spool cover, take out the old line, and wind the new line onto the spool according to the instructions in the user manual.
Check for any debris caught in the cutting head. Ensure the trimmer line is correctly installed and balanced. Tighten any loose parts.
The battery typically lasts up to 40 minutes on a full charge, depending on usage conditions and cutting intensity.
No, it is not safe to use the trimmer in wet conditions as it may damage the tool and pose a safety hazard. Always operate in dry conditions.