Scheppach B S25 88000902 Operating Instructions

The Scheppach B S25 88000902 Drill has a maximum drilling capacity of 25mm in steel and 40mm in wood.
To change the drill bit, first ensure the drill is turned off and unplugged. Loosen the chuck key to release the current bit, insert the new bit, and tighten the chuck securely.
If the drill does not start, check the power supply, ensure the drill is properly plugged in, and examine the fuse or circuit breaker. If the issue persists, consult a professional technician.
Regularly clean the drill and its components, lubricate moving parts, and inspect the power cord for any damage. Store the drill in a dry, clean place when not in use.
Use a light machine oil to lubricate the moving parts of the Scheppach B S25 88000902 Drill. Avoid using heavy grease or oils that can attract dust and debris.
To ensure accurate drilling, secure the material using clamps, mark the drilling spot clearly, and use a steady hand. Adjust the speed settings according to the material being drilled.
Always wear safety goggles and gloves, keep the work area clean, and avoid loose clothing or jewelry that can get caught in the drill. Ensure proper ventilation if drilling in enclosed spaces.
If the drill overheats, stop using it immediately and allow it to cool down. Check for blockages in the ventilation slots and avoid overloading the drill in the future.
While the drill is primarily designed for drilling, it can be used to mix paint or plaster with the appropriate mixing attachment. Ensure the drill is set to a low speed to prevent splashing.
Check the speed control settings and ensure they are properly adjusted. Inspect the power cord and connections for any damage. If the issue persists, the variable speed control may need servicing.