Saturn Vue Green Line Hybrid 2009 Owner's Manual
![Saturn Vue Green Line Hybrid 2009 manual cover](/images/AKYhGPlHSBWlDjyIpWlrjtJu/thumbs/thumb175x175.webp)
To reset the oil change light, turn the ignition to the "On" position without starting the engine. Fully press the accelerator pedal three times within five seconds. The light should flash and then turn off, indicating the reset is complete.
The recommended tire pressure for the 2009 Saturn Vue Green Line Hybrid is typically 35 PSI for both front and rear tires. However, always check the sticker on the driver's side door jamb for the most accurate specifications.
To improve fuel economy, ensure your tires are properly inflated, perform regular maintenance like oil changes, use the recommended grade of motor oil, and avoid aggressive driving. Additionally, reducing excess weight and using cruise control on highways can help.
The 2009 Saturn Vue Green Line Hybrid typically requires Dex-Cool extended life coolant. Always refer to your owner's manual or the coolant reservoir cap for specific requirements.
If your vehicle is not starting, check the battery for charge, ensure the starter is functioning, and verify that the fuel system is delivering fuel. Also, inspect the ignition system components such as spark plugs and the ignition coil.
To replace the cabin air filter, open the glove box and remove the limiting arm. Push in on the sides of the glove box to release it, revealing the filter cover. Remove the cover, take out the old filter, and insert the new one, ensuring the airflow indicator points in the correct direction.
Common causes for the check engine light include a loose gas cap, faulty oxygen sensors, an emissions control problem, or issues with the catalytic converter. A diagnostic scan tool can help pinpoint the exact cause.
It is recommended to change the brake fluid every 30,000 miles or every two years, whichever comes first. Regularly checking the brake fluid level and condition is also advised.
If your vehicle is overheating, safely pull over and turn off the engine. Allow it to cool before checking the coolant level. Inspect for leaks or a malfunctioning radiator fan. Avoid opening the radiator cap while the engine is hot.
To test the battery health, use a multimeter to check the voltage. A fully charged battery should read about 12.6 volts. Alternatively, a load test can be performed by a professional mechanic to assess the battery's ability to hold charge under load.