Saturn Sky 2010 Owner's Manual
![Saturn Sky 2010 manual cover](/images/ByjtbEfbhKeACrLdXFGPQrdD/thumbs/thumb175x175.webp)
The recommended oil type for a 2010 Saturn Sky is 5W-30 synthetic motor oil.
To reset the TPMS on a 2010 Saturn Sky, turn the ignition to the "ON" position without starting the engine, press and hold the TPMS reset button until the tire pressure light blinks three times, then drive the vehicle for a few minutes to complete the reset process.
To replace the battery in a 2010 Saturn Sky, ensure the car is turned off, disconnect the negative then positive battery cables, remove the battery hold-down bracket, and replace the old battery with a new one. Reconnect the cables in reverse order.
Start by checking the A/C fuse and relay. If they are intact, inspect the refrigerant level and look for leaks. If the issue persists, it may require a professional diagnostic to check the compressor and other components.
Common signs include squealing or grinding noises when braking, a spongy brake pedal, longer stopping distances, and visible wear on the brake pads below 1/4 inch thickness.
Open the hood, disconnect the power connector from the back of the headlight, remove the rubber dust cover, unclip the bulb retaining clip, and replace the old bulb with a new one. Reassemble in reverse order.
Regular maintenance includes oil and filter changes every 5,000 miles, checking tire pressure monthly, rotating tires every 7,500 miles, replacing the air filter every 15,000 miles, and inspecting the brakes and suspension components regularly.
To improve fuel efficiency, ensure proper tire inflation, perform regular maintenance such as oil changes and air filter replacements, avoid excessive idling, and drive at steady speeds.
Check for any lights or electronics left on, test the battery and alternator for proper function, and inspect for electrical shorts or parasitic drains. If unresolved, consult a professional mechanic.
Locate the cabin air filter housing under the dashboard on the passenger side, remove the cover, slide out the old filter, and replace it with a new one, ensuring the airflow direction is correct.