Parkside PHDB 4 C3 3907702980 IAN 3271931904 Instructions

The Parkside PHDB 4 C3 pressure washer has a maximum pressure output of 150 bar, which is suitable for various cleaning tasks around the home and garden.
To safely start the pressure washer, ensure it is connected to a water supply and the power outlet. Turn on the water supply, release any air in the system by squeezing the trigger gun, and then switch on the power. To stop, release the trigger, turn off the power, and then turn off the water supply.
Check for any blockages in the nozzle or hose, ensure the water supply is adequate, and inspect the inlet filter for debris. Clean or replace these components as needed.
Regular maintenance should be performed after every 50 hours of use or at least once a year. This includes checking hoses, connections, and cleaning filters to ensure optimal performance.
No, the Parkside PHDB 4 C3 pressure washer is designed to be used with cold water only. Using hot water can damage the pump and other components.
Use only detergents specifically designed for pressure washers. Follow the manufacturer's instructions for dilution and application to avoid damage to the machine or surfaces being cleaned.
To prevent freezing, drain all water from the unit and hoses, and store the pressure washer in a dry place at temperatures above freezing. Consider using pump saver antifreeze for additional protection.
Check to ensure the power cord is properly connected, the power switch is turned on, and the water supply is adequate. Also, inspect the extension cord for any damage and ensure the power outlet is functioning.
To clean the inlet filter, disconnect the hose, remove the filter, and rinse it under running water to remove any debris. Reinstall it carefully to ensure no air leaks occur.
Yes, the Parkside PHDB 4 C3 comes with an adjustable nozzle that allows you to change the spray pattern from a wide fan to a concentrated stream for different cleaning tasks.