Oldsmobile Aurora 1997 Owner's Manual
![Oldsmobile Aurora 1997 manual cover](/images/qcmIICjCTuunnsfQnCoHWuet/thumbs/thumb175x175.webp)
The recommended oil type for the 1997 Oldsmobile Aurora is 10W-30. It is important to use high-quality engine oil to ensure optimal engine performance and longevity.
To reset the "Change Oil" light, turn the ignition to the "ON" position without starting the engine. Press the gas pedal fully three times within five seconds. The light should flash and then go out, indicating the reset was successful.
Common causes of engine overheating include a faulty thermostat, a leaking radiator, a malfunctioning water pump, or low coolant levels. It is important to inspect these components and ensure the cooling system is in good working order.
First, check the A/C fuse and relay. If these are functioning, inspect the refrigerant level and look for leaks in the system. It may also be necessary to examine the compressor and clutch for any signs of damage or wear.
The recommended tire pressure for the 1997 Oldsmobile Aurora is 30 psi for both front and rear tires. Always check the pressure when the tires are cold for an accurate reading.
Open the hood and locate the back of the headlight assembly. Remove the protective cover, then twist and remove the bulb holder. Replace the old bulb with a new one, ensuring not to touch the glass with bare hands, and reassemble the components.
Transmission slipping can be caused by low transmission fluid levels, worn clutch plates, or a failing transmission solenoid. It is advisable to check the fluid level first and consult a professional mechanic if the issue persists.
For optimal performance, it is recommended to change the spark plugs every 60,000 miles. Using high-quality spark plugs that meet OEM specifications is essential for maintaining engine efficiency.
Possible reasons for battery drain include a malfunctioning alternator, a parasitic electrical drain, or a failing battery. It is crucial to test the alternator output and inspect for any electrical shorts or components drawing power when the vehicle is off.
To fix a leaking sunroof, first, inspect the sunroof seals for any signs of damage or wear. Clean out any debris from the sunroof drains. If the seals are worn out, they should be replaced.