Oldsmobile Aurora 1998 Owner's Manual
![Oldsmobile Aurora 1998 manual cover](/images/ZHmQbSnKgFOArVfTrPJmzyUd/thumbs/thumb175x175.webp)
To reset the oil change light, turn the ignition to the "On" position without starting the engine. Press the "Reset" button located in the fuse panel on the driver's side until the "Change Oil" light flashes, then release the button. This should reset the light.
The 1998 Oldsmobile Aurora is recommended to use 10W-30 engine oil for optimal performance. Always check the owner's manual for any specific requirements based on your driving conditions.
Start by checking the coolant level and ensure there are no leaks. Inspect the radiator and hoses for damage or blockages. Ensure the thermostat is functioning correctly and that the radiator fan operates properly. If the problem persists, consult a mechanic.
First, check the battery connections and ensure they are tight and free of corrosion. Test the battery voltage to ensure it's charged. If the battery is fine, inspect the starter and ignition system. If issues persist, seek professional diagnostic services.
Open the hood and locate the headlight assembly. Remove the retaining screws and pull out the assembly. Disconnect the electrical connector and remove the old bulb. Insert the new bulb, reconnect the connector, and reassemble the headlight.
The recommended tire pressure for the 1998 Oldsmobile Aurora is generally 30-32 psi for both front and rear tires. Always refer to the placard on the driver’s side door jamb for the most accurate information.
Relieve the fuel system pressure by removing the fuel pump fuse while the engine is running. Once it stalls, disconnect the battery. Locate the fuel filter under the vehicle near the fuel tank, disconnect the lines, and replace the filter. Reconnect the lines and battery, then start the engine to check for leaks.
Common issues include hard shifting, slipping, and delayed engagement. Regular maintenance, including fluid changes, can prevent some problems. If you experience any issues, it may require a professional diagnostic to determine if repairs or adjustments are needed.
Check the fuses for any blown ones and replace them. Inspect wiring for damage or loose connections. If specific components are malfunctioning, check their individual relays and connections. Persistent issues may require professional inspection of the electrical system.
Locate the brake fluid reservoir under the hood. Ensure the vehicle is on a level surface and the engine is cool. Check the fluid level against the "Min" and "Max" markings on the reservoir. If low, add the recommended brake fluid type as specified in the owner's manual.