Nikon Coolpix L820 Reference Manual
![Nikon Coolpix L820 manual cover](/images/8a7e48fe2c2d0a94b1c59a82/thumbs/thumb175x175.webp)
You can transfer photos by connecting the camera to your computer using the USB cable that came with the camera. Turn on the camera, and your computer should recognize it as a removable drive. You can then drag and drop the files to your desired location on your computer.
Battery drain can occur due to several reasons such as using the camera's LCD screen extensively, shooting videos, or using high-power flash. Ensure that you turn off the camera when not in use, and consider using rechargeable batteries for longer life.
First, check if the batteries are correctly installed and fully charged. If the camera still does not turn on, try replacing the batteries. If the issue persists, the camera may need servicing.
To reset the camera settings to default, go to the menu, navigate to the 'Setup' section, and select 'Reset All'. This will restore the camera to its factory settings.
Blurry photos can be caused by camera shake, especially in low light conditions. Use a tripod or increase the shutter speed. Make sure the VR (Vibration Reduction) feature is enabled.
Use a blower to remove dust, then gently clean the lens with a microfiber cloth. For stubborn spots, use a lens cleaning solution. Avoid using household cleaners, as they can damage the lens.
The Coolpix L820 is compatible with SD, SDHC, and SDXC memory cards. It is recommended to use cards with a Class 6 speed rating or higher for optimal performance.
To extend battery life, reduce the time the LCD screen is on, limit the use of flash, and switch off the camera when not in use. Consider using high-capacity rechargeable NiMH batteries.
Try removing the batteries and then reinserting them after a few seconds. If the camera continues to freeze, it may need to be reset or serviced by a professional.
Check the Nikon website for any available firmware updates for the Coolpix L820. Download the update, transfer it to your memory card, and follow the instructions provided by Nikon to install it on your camera.