Contents

FR-A8ND E KIT INSTRUCTION MANUAL
Safety instructions
CONTENTS
1 PRE-OPERATION INSTRUCTIONS
- 1.1 Unpacking and product confirmation
- 1.2 Component names
- 1.3 MNS LED (operation status indication)
- 1.4 Specifications
2 INSTALLATION
- 2.1 Pre-installation instructions
- 2.2 Installation procedure
- 2.3 Node address setting
3 WIRING
- 3.1 Connection to network
- 3.2 Wiring
4 INVERTER SETTING
- 4.1 Parameter list
- 4.2 DeviceNet data
  - 4.2.1 DeviceNet address (Pr.345)
  - 4.2.2 DeviceNet baud rate (Pr.346)
- 4.3 Operation mode setting
  - 4.3.1 Operation mode switching and communication startup mode (Pr.79, Pr.340)
- 4.4 Operation at communication error occurrence
  - 4.4.1 Operation selection at communication error occurrence (Pr.500 to Pr.502, Pr.779)
  - 4.4.2 Fault and measures
- 4.5 Inverter reset
- 4.6 Frequency and speed settings
5 FUNCTIONS
- 5.1 Output from the inverter to the network
- 5.2 Input to the inverter from the network
6 OBJECT MAP DEFINITIONS
- 6.1 Object model of DeviceNet
- 6.2 Data communication type
  - 6.2.1 Overview of the I/O communication (polling)
  - 6.2.2 Overview of the message communication (Explicit message connection)
- 6.3 Response level
  - 6.3.1 Response level of the I/O communication (polling)
  - 6.3.2 Response level of the message communication (Explicit message connection)
- 6.4 Recommendation for software developers
7 OBJECT MAP
- 7.1 Format of the I/O communication (polling)
  - 7.1.1 Output Instance 20/Input Instance 70
  - 7.1.2 Output Instance 21/Input Instance 71
  - 7.1.3 Output Instance 126/Input Instance 176
  - 7.1.4 Output Instance 127/Input Instance 177
- 7.2 Message communication (Explicit message connection)
  - 7.2.1 Class 0x01 (Identity-Object)
  - 7.2.2 Class 0x03 (DeviceNet Object)
  - 7.2.3 Class 0x04 (Assembly Object)
  - 7.2.4 Class 0x05 (DeviceNet connection object)
  - 7.2.5 Class 0x28 (Motor data object)
  - 7.2.6 Class 0x29 (Control supervisor object)
  - 7.2.7 Class 0x2A (AC drive object)
  - 7.2.8 Class 0x66 (Extended object I)
  - 7.2.9 Class 0x67 (Extended object II)
  - 7.2.10 Class 0x70 to 0x79 (Extended object III)
  - 7.2.11 Class 0x80 (Extended object IV)
  - 7.2.12 Class 0x90 to 0x94 (Extended object V)
APPENDIX
- Appendix 1 EDS file
- Appendix 2 DeviceNet Error Code List
- Appendix 3 Replacement of the FR-E700
- Appendix 4 Instructions for compliance with the EU Directives
- Appendix 5 Instructions for EAC
- Appendix 6 Restricted Use of Hazardous Substances in Electronic and Electrical Products
- Appendix 7 Referenced Standard (Requirement of Chinese standardized law)
REVISIONS

Mitsubishi FR-A8ND E Instruction Manual

Mitsubishi FR-A8ND E Inverter manual cover

Pages 102

Year 2020

Language(s)

of 102

Mitsubishi FR-A8ND E Inverter Specification

The Mitsubishi FR-A8ND E Inverter is a high-performance device designed for precision control in industrial applications. It integrates seamlessly into the FR-A800 series, offering advanced network communication capabilities. The inverter supports Ethernet-based communication, allowing for easy integration into various network environments, which enhances data exchange and remote monitoring functionalities. Its design incorporates a dual-port option, ensuring network redundancy and providing reliability in communication, essential for critical industrial operations.

The FR-A8ND E Inverter features a robust set of functionalities, including real-time data acquisition and advanced diagnostics, which facilitate proactive maintenance and reduce downtime. Its high-speed communication support ensures minimal latency, optimizing the performance of connected systems. The inverter also supports multiple protocols, enhancing its versatility across different industrial settings.

In terms of power management, the FR-A8ND E Inverter offers precise motor control, contributing to energy efficiency and operational cost reduction. Its user-friendly interface and comprehensive software toolset enable easy configuration and customization, catering to specific application requirements. The inverter is designed with durability in mind, offering reliable performance in harsh industrial environments, with features such as built-in protection against overvoltage, overload, and short-circuit conditions.

Overall, the Mitsubishi FR-A8ND E Inverter stands out for its integration capabilities, robust communication features, and energy-efficient performance, making it a suitable choice for industries seeking reliable and efficient motor control solutions.

Mitsubishi FR-A8ND E Inverter F.A.Q.

How do I set up the Mitsubishi FR-A8ND E Inverter for the first time?

To set up the Mitsubishi FR-A8ND E Inverter, ensure all connections are secure, configure the control parameters via the built-in keypad, and follow the user manual's step-by-step guide for initial setup.

What should I do if the inverter does not start?

Check all power connections, ensure the inverter is properly grounded, verify that the input voltage is within the specified range, and check for any error codes on the display.

How can I reset the inverter after a fault occurs?

To reset the inverter, press the 'Reset' button on the keypad. If it does not reset, turn off the power supply, wait for a few minutes, and then power it on again.

What maintenance is required for the Mitsubishi FR-A8ND E Inverter?

Regularly inspect the inverter for dust and debris, ensure that ventilation is not obstructed, check for loose connections, and perform periodic software updates as recommended by Mitsubishi.

How can I extend the life of my Mitsubishi FR-A8ND E Inverter?

Keep the inverter in a cool, dry place, perform regular maintenance checks, avoid overloading, and ensure proper ventilation to prevent overheating.

What is the procedure to update the firmware on the inverter?

Download the latest firmware from the Mitsubishi website, connect the inverter to a computer via the appropriate interface, and follow the instructions provided in the firmware update guide.

Why is my inverter displaying an overcurrent error?

An overcurrent error can be caused by a short circuit, motor malfunction, or incorrect parameter settings. Check the motor and wiring, then review and adjust the parameters as necessary.

How do I connect external devices to the FR-A8ND E Inverter?

Use the built-in ports for communication and control, refer to the manual for the correct wiring diagram, and ensure that external devices are compatible with the inverter's specifications.

What precautions should be taken when installing the inverter?

Ensure the inverter is mounted on a non-combustible surface, maintain sufficient clearance for airflow, use appropriate wire gauges, and follow all local electrical codes and standards.

Can I use the Mitsubishi FR-A8ND E Inverter with a generator?

Yes, but ensure that the generator provides stable voltage and frequency outputs within the inverter's specifications. It is advisable to use a line reactor or filter for additional protection.