Contents

FR-A8NP E KIT INSTRUCTION MANUAL
Safety instructions
CONTENTS
1 PRE-OPERATION INSTRUCTIONS
- 1.1 Unpacking and product confirmation
- 1.2 Component names
- 1.3 Specifications
  - 1.3.1 Inverter option specifications
  - 1.3.2 Communication specifications
2 INSTALLATION
- 2.1 Pre-installation instructions
- 2.2 Installation procedure
- 2.3 Node address switch setting
3 WIRING
- 3.1 Terminals
- 3.2 Wiring
4 INVERTER SETTING
- 4.1 Parameter list
- 4.2 Operation mode setting
  - 4.2.1 Operation mode switching and communication startup mode (Pr.79, Pr.340)
- 4.3 Operation at communication error occurrence
  - 4.3.1 Operation selection at communication error occurrence (Pr.500 to Pr.502, Pr.779)
  - 4.3.2 Fault and measures
- 4.4 Inverter reset
5 FUNCTIONS
- 5.1 Output from the inverter to the network
- 5.2 Input to the inverter from the network
6 PROFIBUS DEVICE DATA
- 6.1 Device data (GSD file)
- 6.2 Slave user parameter
7 PPO TYPE SUPPORT SPECIFICATION
- 7.1 PROFIBUS profiles
- 7.2 ID definitions
- 7.3 Buffer memory configuration
- 7.4 Buffer memory details
- 7.5 Outline of PNU
- 7.6 PROFIBUS PNU
  - 7.6.1 Real-time monitor
  - 7.6.2 Parameter clear
  - 7.6.3 Operation mode read/write
  - 7.6.4 Set frequency read
  - 7.6.5 Terminal input read
  - 7.6.6 Inverter reset
  - 7.6.7 Node address read
  - 7.6.8 Fault history read
  - 7.6.9 PNU list read
- 7.7 Standard parameters
- 7.8 PROFIBUS-DP communication function setting
  - 7.8.1 Torque command / torque limit via PROFIBUS communication (Pr.804)
  - 7.8.2 Frequency command with sign (Pr.541)
8 PPO TYPE NON-SUPPORT SPECIFICATION
- 8.1 PROFIBUS profiles
- 8.2 ID definitions
- 8.3 Buffer memory configuration
- 8.4 Buffer memory details
- 8.5 Outline of PNU
- 8.6 PROFIBUS PNU (module type A5NP)
  - 8.6.1 Real-time monitor area (IND = H0000 (IND = H00, PP = H00))
  - 8.6.2 System environment variable (sev) area (IND = H01PP (IND = H01, PP = H00, H01))
- 8.7 Standard parameters
  - 8.7.1 Normal parameter area (IND = H0200 (IND = H02, PP = H00))
  - 8.7.2 Pr.900 to calibration parameter (frequency) area (IND = H0300 (IND = H03, PP = H00))
  - 8.7.3 Pr.900 to calibration parameter (%) area (IND = H0400 (IND = H04, PP = H00))
9 TROUBLESHOOTING
APPENDIX
- Appendix 1 Instructions for compliance with the EU Directives
- Appendix 2 Instructions for EAC
- Appendix 3 Restricted Use of Hazardous Substances in Electronic and Electrical Products
- Appendix 4 Referenced Standard (Requirement of Chinese standardized law)
- Appendix 5 Compliance with the UK certification scheme
REVISIONS

Mitsubishi Electric FR A8NP E KIT Instructions Manual

Mitsubishi Electric FR A8NP E KIT manual cover

Pages 88

Year 0

Language(s)

of 88

Mitsubishi Electric FR A8NP E KIT Specification

The Mitsubishi Electric FR A8NP E KIT is an advanced communication module designed to enhance the functionality and connectivity of Mitsubishi Electric's FR-A800 series inverters. This kit integrates seamlessly with existing systems to provide users with greater control and monitoring capabilities. It supports Ethernet-based communication protocols, enabling efficient data exchange and interoperability with various network environments. The FR A8NP E KIT is engineered to deliver high-speed communication, allowing real-time monitoring and control of inverter operations. It is equipped with robust security features to ensure data integrity and prevent unauthorized access, making it suitable for industrial applications that require reliable data transmission.

The module's compact design allows for easy installation without requiring extensive modifications to existing setups. It supports multiple communication protocols, including CC-Link IE Field Network, which facilitates integration into complex automation systems. The kit is designed to be energy-efficient while maintaining high performance, contributing to the overall energy savings of the system it is integrated into. Its user-friendly interface and comprehensive diagnostic functions enable straightforward setup and troubleshooting, reducing downtime and maintenance costs.

Mitsubishi Electric's commitment to quality and innovation is reflected in the FR A8NP E KIT, which is built to withstand industrial environments and deliver consistent performance. It adheres to international standards, ensuring compatibility and reliability across different regions and applications. The FR A8NP E KIT is an ideal solution for industries seeking to enhance their automation systems with advanced communication capabilities, ensuring efficient and scalable operations.

Mitsubishi Electric FR A8NP E KIT F.A.Q.

How do I install the Mitsubishi Electric FR A8NP E KIT?

To install the FR A8NP E KIT, first ensure that all power is turned off to the drive. Mount the kit securely using the provided brackets and screws. Connect the communication cables according to the wiring diagram in the user manual, ensuring that all connections are secure and correctly aligned.

What should I do if the FR A8NP E KIT is not communicating with the PLC?

Check all connections to ensure they are secure and correctly made. Verify that the communication settings (baud rate, parity, etc.) on the drive and PLC match. Consult the troubleshooting section of the manual for specific error codes.

How can I update the firmware on my FR A8NP E KIT?

To update the firmware, download the latest version from the Mitsubishi Electric website. Connect the kit to your computer via the appropriate interface. Use the provided software tool to upload the firmware to the device, following the on-screen instructions.

What maintenance is required for the FR A8NP E KIT?

Regularly inspect the kit for any signs of wear or damage. Ensure that all connections are tight and free from corrosion. Clean the device using a soft, dry cloth to remove any dust or debris. Refer to the maintenance schedule in the user manual for detailed guidance.

Can the FR A8NP E KIT be used in outdoor applications?

The FR A8NP E KIT is designed for indoor use in a controlled environment. If outdoor use is necessary, ensure the kit is housed in a weatherproof enclosure that provides adequate protection against moisture, dust, and temperature variations.

What are the common error codes for the FR A8NP E KIT and their solutions?

Common error codes include E1 (communication error), E2 (overvoltage), and E3 (overcurrent). Solutions involve checking connections, ensuring power supply stability, and verifying that the load is within specified limits. Consult the manual for a complete list of error codes and troubleshooting steps.

How do I configure the FR A8NP E KIT for a specific application?

Configuration involves setting the correct parameters in the drive's software interface. Access the configuration menu and adjust settings such as motor control type, frequency limits, and acceleration/deceleration times according to the application requirements. Refer to the user manual for detailed instructions.

What should I do if the FR A8NP E KIT overheats?

Ensure that the kit is installed with adequate ventilation and that cooling fans are operational. Check for any obstructions blocking airflow. If overheating persists, reduce the load or operate the kit within its rated capacity.

How do I reset the FR A8NP E KIT to its factory settings?

To reset to factory settings, access the main menu on the drive's interface, navigate to the reset option, and confirm the action. This will restore all parameters to their original default values. Ensure that you back up any necessary data before performing a reset.

What are the power requirements for the FR A8NP E KIT?

The power requirements for the FR A8NP E KIT depend on the specific model and application. Typically, it requires a stable AC voltage supply within the specified range in the user manual. Always refer to the technical specifications for precise requirements.