Contents

FR-A8ND E KIT INSTRUCTION MANUAL
Safety instructions
CONTENTS
1 PRE-OPERATION INSTRUCTIONS
- 1.1 Unpacking and product confirmation
- 1.2 Component names
- 1.3 MNS LED (operation status indication)
- 1.4 Specifications
2 INSTALLATION
- 2.1 Pre-installation instructions
- 2.2 Installation procedure
- 2.3 Node address setting
3 WIRING
- 3.1 Connection to network
- 3.2 Wiring
4 INVERTER SETTING
- 4.1 Parameter list
- 4.2 DeviceNet data
  - 4.2.1 DeviceNet address (Pr.345)
  - 4.2.2 DeviceNet baud rate (Pr.346)
- 4.3 Operation mode setting
  - 4.3.1 Operation mode switching and communication startup mode (Pr.79, Pr.340)
- 4.4 Operation at communication error occurrence
  - 4.4.1 Operation selection at communication error occurrence (Pr.500 to Pr.502, Pr.779)
  - 4.4.2 Fault and measures
- 4.5 Inverter reset
- 4.6 Frequency and speed settings
5 FUNCTIONS
- 5.1 Output from the inverter to the network
- 5.2 Input to the inverter from the network
6 OBJECT MAP DEFINITIONS
- 6.1 Object model of DeviceNet
- 6.2 Data communication type
  - 6.2.1 Overview of the I/O communication (polling)
  - 6.2.2 Overview of the message communication (Explicit message connection)
- 6.3 Response level
  - 6.3.1 Response level of the I/O communication (polling)
  - 6.3.2 Response level of the message communication (Explicit message connection)
- 6.4 Recommendation for software developers
7 OBJECT MAP
- 7.1 Format of the I/O communication (polling)
  - 7.1.1 Output Instance 20/Input Instance 70
  - 7.1.2 Output Instance 21/Input Instance 71
  - 7.1.3 Output Instance 126/Input Instance 176
  - 7.1.4 Output Instance 127/Input Instance 177
- 7.2 Message communication (Explicit message connection)
  - 7.2.1 Class 0x01 (Identity-Object)
  - 7.2.2 Class 0x03 (DeviceNet Object)
  - 7.2.3 Class 0x04 (Assembly Object)
  - 7.2.4 Class 0x05 (DeviceNet connection object)
  - 7.2.5 Class 0x28 (Motor data object)
  - 7.2.6 Class 0x29 (Control supervisor object)
  - 7.2.7 Class 0x2A (AC drive object)
  - 7.2.8 Class 0x66 (Extended object I)
  - 7.2.9 Class 0x67 (Extended object II)
  - 7.2.10 Class 0x70 to 0x79 (Extended object III)
  - 7.2.11 Class 0x80 (Extended object IV)
  - 7.2.12 Class 0x90 to 0x94 (Extended object V)
APPENDIX
- Appendix 1 EDS file
- Appendix 2 DeviceNet Error Code List
- Appendix 3 Replacement of the FR-E700
- Appendix 4 Instructions for compliance with the EU Directives
- Appendix 5 Instructions for EAC
- Appendix 6 Restricted Use of Hazardous Substances in Electronic and Electrical Products
- Appendix 7 Referenced Standard (Requirement of Chinese standardized law)
REVISIONS

Mitsubishi Electric FR A8ND E KIT Instructions Manual

Mitsubishi Electric FR A8ND E KIT manual cover

Pages 102

Year 2004

Language(s)

of 102

Mitsubishi Electric FR A8ND E KIT Specification

The Mitsubishi Electric FR-A8ND E KIT is an advanced communication module designed to enhance the functionality of Mitsubishi's FR-A800 series inverters. This kit provides seamless integration with Ethernet-based networks, facilitating efficient and reliable data exchange. It supports multiple communication protocols, including Modbus/TCP and CC-Link IE Field Basic, ensuring compatibility with a wide range of industrial automation systems.

The module is engineered to deliver high-speed data transmission, which is crucial for real-time monitoring and control applications. It offers a robust and secure connection, minimizing the risk of data loss and ensuring consistent operational performance. The FR-A8ND E KIT is equipped with diagnostic features that simplify troubleshooting and maintenance, helping to reduce downtime and improve overall system efficiency.

Installation is straightforward, as the kit is designed to fit directly into the inverter, requiring minimal setup. The configuration process is user-friendly, supported by Mitsubishi's intuitive software tools, which allow for easy parameter setting and network configuration. The module's compact design ensures that it does not add significant size or weight to the existing inverter setup.

The FR-A8ND E KIT is built to withstand industrial environments, featuring a durable construction that ensures long-lasting performance. It is an ideal solution for industries looking to modernize their automation systems with enhanced connectivity and control capabilities. This kit represents Mitsubishi Electric's commitment to providing innovative solutions that meet the evolving needs of industrial automation.

Mitsubishi Electric FR A8ND E KIT F.A.Q.

How do I install the Mitsubishi Electric FR A8ND E KIT?

To install the FR A8ND E KIT, first power down your inverter. Remove the front cover and connect the kit to the designated option port. Secure the kit using the screws provided and reattach the cover. Ensure all connections are tight before powering up the system.

What are the common troubleshooting steps if the FR A8ND E KIT is not working?

Verify all connections are secure and the kit is properly seated in the option port. Check for any error codes on the inverter's display and consult the manual for error resolution. Ensure the firmware is up-to-date and the kit is compatible with your inverter model.

How can I update the firmware of the FR A8ND E KIT?

Connect the kit to a PC via the USB interface. Use the Mitsubishi Electric software to check for firmware updates and follow the on-screen instructions to complete the update process. Ensure to back up any important configurations before proceeding.

What maintenance is required for the FR A8ND E KIT?

Regularly check the connections for any signs of wear or corrosion. Ensure the environment is free from excessive dust and moisture. Perform routine inspections every 6 months and update the firmware as needed to maintain optimal performance.

How do I integrate the FR A8ND E KIT with a PLC?

To integrate with a PLC, configure the communication settings on both the inverter and the PLC to ensure compatibility. Use the appropriate communication protocols such as Modbus or Ethernet/IP and verify the PLC can read and write data to the inverter.

Can the FR A8ND E KIT be used with multiple inverters?

The FR A8ND E KIT is designed for use with a single inverter at a time. For multi-inverter setups, each inverter will require its own kit to ensure proper communication and functionality.

What should I do if the FR A8ND E KIT is not detected by the inverter?

Check that the kit is correctly installed and all connections are secure. Restart the inverter and check if the kit is recognized. If the issue persists, try resetting the inverter to factory settings and reinstall the kit.

How do I configure the communication settings for the FR A8ND E KIT?

Access the inverter's settings menu and navigate to the communication settings. Set the baud rate, data bits, parity, and stop bits to match your network configuration. Save the settings and restart the system to apply the changes.

What are the benefits of using the FR A8ND E KIT with Mitsubishi inverters?

The FR A8ND E KIT enhances the communication capabilities of Mitsubishi inverters, allowing for seamless integration with automation systems, improved monitoring, and enhanced data logging capabilities. It also supports various communication protocols, increasing flexibility.

Is it possible to use the FR A8ND E KIT in harsh environments?

While the FR A8ND E KIT is robust, it is recommended to install it in an environment free from extreme temperatures, excessive dust, and moisture. Using enclosures to protect the inverter and kit can help extend their lifespan in harsh conditions.