Contents

FR-A7ND E kit INSTRUCTION MANUAL
This section is specifically aboutsafety matters
SAFETY INSTRUCTIONS
CONTENTS
1 PRE-OPERATION INSTRUCTIONS
- 1.1 Unpacking and Product Confirmation
  - 1.1.1 SERIAL number
  - 1.1.2 Product confirmation
- 1.2 Parts
- 1.3 MNS LED (operation status indication)
- 1.4 Specifications
2 INSTALLATION
- 2.1 Pre-Installation Instructions
- 2.2 Installation Procedure
- 2.3 Node Address Setting
3 WIRING
- 3.1 Connection to Network
- 3.2 Wiring
4 INVERTER SETTING
- 4.1 Parameter List
- 4.2 DeviceNet Data
  - 4.2.1 DeviceNet address (Pr. 345)
  - 4.2.2 DeviceNet baud rate (Pr. 346)
- 4.3 Operation Mode Setting
  - 4.3.1 Operation mode indication
  - 4.3.2 Operation mode switching and communication startup mode (Pr. 79, Pr. 340)
- 4.4 Operation and Speed Command Source (Pr. 338, Pr. 339, Pr. 550)
  - 4.4.1 Communication EEPROM write selection (Pr. 342)
- 4.5 Operation at Communication Error Occurrence
  - 4.5.1 Operation selection at communication error occurrence (Pr. 500 to Pr. 502)
  - 4.5.2 Alarm and measures
- 4.6 Inverter Reset
- 4.7 Frequency and Speed Conversion Specifications
5 FUNCTIONS
- 5.1 Output from the Inverter to the Network
- 5.2 Input to the Inverter from the Network
6 OBJECT MAP DEFINITIONS
- 6.1 Object Model of DeviceNet Communication
- 6.2 Response Level
  - 6.2.1 Response level of Polling I/O
  - 6.2.2 Response level of explicit message
- 6.3 Recommendation for Software Developers
7 OBJECT MAP
- 7.1 Class 0x01 (Identity-Object)
  - 7.1.1 Class 0x01 Instance 0
  - 7.1.2 Class 0x01 Instance 1
- 7.2 Class 0x03 (DeviceNet Object)
  - 7.2.1 Class 0x03 Instance 1
- 7.3 Class 0x04 (Assembly Object)
  - 7.3.1 Output Instance 20/Input Instance 70
  - 7.3.2 Output Instance 21/Input Instance 71
  - 7.3.3 Output Instance 126/Input Instance 176
- 7.4 Class 0x05 (DeviceNet Connection Object)
  - 7.4.1 Class 0x05 Instance 1 Attribute (Explicit message connection)
  - 7.4.2 Class 0x05 Instance 2 Attribute (Polling I/O connection)
  - 7.4.3 Class 0x05 Instance 4, 5, 6 Attribute (Explicit message connection)
  - 7.4.4 Class 0x05 Instance 1, 2, 4, 5, 6 service
- 7.5 Class 0x28 (Motor Data Object)
  - 7.5.1 Class 0x28 Instance 1
- 7.6 Class 0x29 (Control Supervisor Object)
  - 7.6.1 Class 0x29 Instance 1
- 7.7 Class 0x2A (AC Drive Object)
  - 7.7.1 Class 0x2A Instance 1
- 7.8 Class 0x66 (Extended Object I)
  - 7.8.1 Class 0x66 Instance 1
- 7.9 Class 0x67 (Extended Object II)
  - 7.9.1 Class 0x67 Instance 1
- 7.10 Class 0x70 to 0x79 (Extended Object III)
  - 7.10.1 Class 0x70 to 0x79 Instance 1, 2
- 7.11 Class 0x80 (Extended Object IV)
  - 7.11.1 Class 0x80 Instance 1
- 7.12 FR-E5ND (FR-E500-KND) Compatible Mode
8 TROUBLESHOOTING
APPENDIX
- EDS File
- Error Code List
REVISIONS

Mitsubishi Electric FR A7ND E Kit Instructions Manual

Mitsubishi Electric FR A7ND E Kit manual cover

Pages 104

Year 2012

Language(s)

of 104

Mitsubishi Electric FR A7ND E Kit Specification

The Mitsubishi Electric FR A7ND E Kit is an advanced communication module designed to enhance the functionality of Mitsubishi's FR-A700 series inverters. This kit facilitates seamless integration into industrial networks by supporting DeviceNet communication protocols, allowing for efficient and reliable data exchange within automation systems. The module is engineered to provide high-speed communication, ensuring real-time control and monitoring capabilities essential for modern manufacturing environments.

The FR A7ND E Kit features a compact design that integrates easily with the existing inverter setup, minimizing installation complexity and preserving valuable space within control panels. It is equipped with robust diagnostic capabilities, offering status indicators and error codes that enable swift troubleshooting and maintenance, thereby reducing downtime. The module supports multiple baud rates, enhancing its versatility and compatibility with a wide range of network configurations.

This communication kit is engineered with durability in mind, capable of withstanding harsh industrial conditions while maintaining consistent performance. It is compliant with international standards, ensuring reliable operation across global markets. The FR A7ND E Kit is accompanied by comprehensive documentation and support, providing users with detailed installation instructions and technical assistance to facilitate seamless deployment.

In terms of compatibility, the kit is specifically designed for the FR-A700 series, ensuring optimal performance and integration. It enhances the inverter's capabilities by allowing for centralized control and monitoring, which is crucial for optimizing energy efficiency and process management in industrial applications. Overall, the Mitsubishi Electric FR A7ND E Kit represents a vital component for industries seeking to upgrade their automation systems with advanced communication solutions.

Mitsubishi Electric FR A7ND E Kit F.A.Q.

How do I install the Mitsubishi Electric FR A7ND E Kit?

To install the Mitsubishi Electric FR A7ND E Kit, first ensure the power is turned off. Mount the kit securely in the designated location following the installation manual. Connect the necessary wiring, ensuring all connections are tight and secure. Once installed, power on the system and configure settings as required.

What are the common troubleshooting steps if the FR A7ND E Kit is not functioning properly?

If the FR A7ND E Kit is not functioning, first check all connections to ensure they are secure. Verify that the unit is receiving power. Check for any error codes displayed and refer to the manual for specific error resolutions. Reset the system if necessary and contact support if the issue persists.

How often should I perform maintenance on the FR A7ND E Kit?

Maintenance for the FR A7ND E Kit should be performed every six months. This includes inspecting all electrical connections, cleaning the unit to prevent dust accumulation, and checking for signs of wear or damage. Refer to the maintenance section of the manual for detailed procedures.

What should I do if the FR A7ND E Kit overheats?

If the FR A7ND E Kit overheats, immediately shut down the system to prevent damage. Check for adequate ventilation and ensure cooling fans are operational. Inspect the unit for any blockages or dust buildup. Once resolved, allow the unit to cool before restarting.

Can the FR A7ND E Kit be used in outdoor applications?

The FR A7ND E Kit is designed for indoor use only. Using it outdoors may lead to exposure to elements that could damage the unit. If outdoor usage is necessary, ensure it is housed in a weatherproof enclosure.

How do I update the firmware of the FR A7ND E Kit?

To update the firmware of the FR A7ND E Kit, download the latest firmware from the Mitsubishi Electric website. Connect the kit to a computer via the appropriate interface, and follow the firmware update instructions provided in the documentation. Ensure the power supply is stable during the update process.

What are the environmental conditions suitable for operating the FR A7ND E Kit?

The FR A7ND E Kit should be operated in an environment with temperatures between 0°C and 50°C, and humidity levels between 30% and 90% (non-condensing). Ensure the area is free from dust, corrosive gases, and direct sunlight.

How can I reset the FR A7ND E Kit to factory settings?

To reset the FR A7ND E Kit to factory settings, refer to the user manual for the specific reset procedure. Typically, this involves accessing the system menu and selecting the factory reset option. Ensure all important data is backed up before performing a reset.

What are the indicators of a failing FR A7ND E Kit?

Indicators of a failing FR A7ND E Kit include unusual noises, frequent overheating, erratic operation, and persistent error codes. If you notice any of these symptoms, conduct a thorough inspection and consult the troubleshooting guide.

How do I configure the communication settings on the FR A7ND E Kit?

To configure communication settings on the FR A7ND E Kit, access the system menu and navigate to the communication settings. Input the required parameters such as baud rate, parity, and stop bits according to your network requirements. Save the settings and restart the system to apply changes.