Mercedes-Benz SL 2020 Quick Start Guide
![Mercedes-Benz SL 2020 manual cover](/images/a1dc525a3527b2786c6f990b/thumbs/thumb175x175.webp)
To connect your smartphone, enable Bluetooth on your phone, then access the infotainment system's Bluetooth settings. Select 'Add Device' and choose your phone from the list. Follow the prompts to complete the pairing process.
Mercedes-Benz recommends using synthetic motor oil that meets the MB 229.5 specification for optimal performance. Always refer to the owner's manual for the specific oil grade.
After ensuring all tires are properly inflated, turn on the ignition without starting the engine. Use the steering wheel controls to navigate to the 'Service' menu on the display. Select 'Tire Pressure' and then choose 'Reset'.
If the engine warning light comes on, it's advisable to check for any obvious issues such as a loose gas cap. If the light remains on, schedule a diagnostic check with a certified Mercedes-Benz service center.
Locate the cabin air filter under the dashboard on the passenger side. Remove the cover and take out the old filter. Insert the new filter with the airflow arrows pointing in the correct direction, and replace the cover.
If the automatic system fails, refer to the owner's manual for the manual release procedure. Typically, you'll need to access the emergency release located in the trunk and follow the steps to manually disengage the locks.
To update the navigation system, purchase the latest map update from the Mercedes-Benz website. Load the update onto a USB drive, insert it into the car's USB port, and follow the on-screen instructions to complete the update.
The recommended service interval is every 10,000 miles or once a year, whichever comes first. Always refer to your service booklet for specific guidelines and maintain regular checks.
Headrests can be adjusted by pressing the button at the base of the headrest and sliding it up or down to the desired position. Ensure it clicks into place for secure positioning.
If the battery is dead, jump-start the car using jumper cables and another vehicle. Connect the positive and negative terminals correctly and start the engine. Consider replacing the battery if the issue persists.