Mercedes-Benz E-Class Convertible 2019 Quick Start Guide
![Mercedes-Benz E-Class Convertible 2019 manual cover](/images/0728609349b2b9653839b436/thumbs/thumb175x175.webp)
To reset the service indicator, turn on the ignition without starting the engine. Use the left steering wheel buttons to navigate to the mileage screen. Press and hold the "Answer Call" and "OK" buttons together until the workshop menu appears. Use the navigation buttons to select "Assyst Plus," then "Full Service," and confirm the reset.
If the convertible top fails, use the emergency tool kit in the trunk. Locate the manual override mechanism near the rear seat area. Follow the owner's manual steps to manually close the convertible top using the provided tool.
To pair your smartphone, turn on Bluetooth on your device. On the car's infotainment screen, select "Telephone," then "Connect Device." Choose "Search for Phone" and select your device from the list. Confirm the pairing code on both the car display and your phone.
Mercedes-Benz recommends using MB-229.51 or MB-229.52 specification engine oil for the 2019 E-Class Convertible. Always check your owner's manual for the exact specification and viscosity suitable for your engine type.
To replace the cabin air filter, locate it behind the glove compartment. Remove the glove box by detaching screws and carefully pulling it out. Open the filter housing cover, remove the old filter, and insert a new one. Reassemble by reversing the steps.
The recommended tire pressure for the E-Class Convertible is usually around 32 psi for the front tires and 35 psi for the rear tires. Refer to the sticker inside the driver's door for the exact specifications for your specific model and conditions.
To update the navigation system, visit the Mercedes-Benz navigation update website. Download the latest map data onto a USB drive. Insert the USB into the vehicle's port and follow the on-screen instructions to complete the update.
First, check if the A/C system is set to "cool" and the temperature is set correctly. Ensure the climate control is not in "ECON" mode. If the issue persists, inspect the refrigerant level and check for leaks. Consider consulting a professional technician if the problem continues.
The ECO start/stop function is typically enabled by default. If it's disabled, press the ECO button located on the center console. Ensure the system is not manually turned off, and check that all conditions for activation are met, such as battery charge and engine temperature.
If the check engine light illuminates, first check for any obvious issues like a loose gas cap. If the light remains on, have the vehicle's diagnostic codes read with an OBD-II scanner to determine the issue. Consult a certified mechanic if necessary.