McCulloch PowerDrive M145-97T Operator's Manual

To start the McCulloch PowerDrive M145-97T, ensure the parking brake is engaged, the blade engagement lever is in the 'off' position, and the throttle lever is set to 'fast'. Insert the ignition key and turn it clockwise to start the engine.
If the mower does not start, check the fuel level, ensure the battery is charged, and inspect the spark plug for signs of wear or damage. Make sure all safety features are properly set, such as the brake and blade engagement lever.
Change the oil after the first 5 hours of use, and then every 50 hours of operation or at the start of each mowing season. Use SAE 30 oil for optimal performance.
Use unleaded gasoline with a minimum octane rating of 87. Avoid using gasoline with more than 10% ethanol content to prevent engine damage.
To adjust the cutting height, locate the cutting height adjustment lever on each wheel. Move the lever to the desired position to raise or lower the cutting deck. Ensure all wheels are set to the same height for an even cut.
If the blades do not engage, check the blade engagement lever to ensure it is in the 'on' position. Inspect the drive belt for any signs of wear or damage and replace if necessary.
To maintain the battery, keep the terminals clean and free from corrosion. Charge the battery periodically, especially during the off-season, and store it in a dry, cool place when not in use.
Follow this maintenance schedule: check the oil level before each use, clean the air filter every 25 hours, sharpen the blades annually, and inspect belts and cables regularly for wear.
For uneven cutting, ensure the tire pressure is equal on all wheels, check that the blades are sharp and balanced, and confirm the cutting deck is level. Adjust as needed to correct any inconsistencies.
Always wear protective gear, such as safety glasses and sturdy footwear. Clear the mowing area of debris, avoid mowing on wet grass, and never leave the mower unattended while it is running.