McCulloch M11577RB Operator's Manual
![McCulloch M11577RB manual cover](/images/oZqVrTHvmedJmYAkAQjvEKAI/thumbs/thumb175x175.webp)
To start the McCulloch M11577RB, ensure the fuel tank is filled and the oil level is adequate. Set the throttle to the 'start' position, engage the choke if the engine is cold, and pull the starter rope firmly.
Check the fuel and oil levels, inspect the spark plug for damage or wear, and ensure the air filter is clean. If the problem persists, consult the user manual or contact a professional technician.
Change the oil after the first 5 hours of use, then every 25 hours of operation or at the start of each mowing season. Use SAE 30 oil for optimal performance.
Use unleaded gasoline with an octane rating of 87 or higher. Avoid using ethanol blends higher than 10% to prevent damage to the engine.
Disconnect the spark plug wire for safety, then use a garden hose to rinse off grass clippings and debris. For stubborn residue, use a brush and mild detergent. Dry thoroughly before storing.
Regularly sharpen the blades, adjust the cutting height according to the grass length, and mow only when the grass is dry. Ensure the underside of the deck is free from buildup.
Drain the fuel tank, change the oil, clean the mower, check the spark plug, and store it in a dry, protected area. Consider using a fuel stabilizer if fuel is left in the tank.
Remove the spark plug wire, use a spark plug wrench to unscrew the old plug, and install a new one of the same type. Reattach the spark plug wire securely.
Excessive vibration may be caused by unbalanced or damaged blades. Check the blades for damage and balance them if necessary. Tighten any loose components and inspect the engine mountings.
Locate the height adjustment lever on the mower deck. Move the lever to the desired height setting, ensuring all wheels are adjusted equally for an even cut.