Mazda 6 2020 Scheduled Maintenance Manual
![Mazda 6 2020 manual cover](/images/69e871e4dca00ab687f5dc83/thumbs/thumb175x175.webp)
To reset the TPMS on your 2020 Mazda 6, first ensure that all tires are inflated to the recommended pressure. Then, turn the ignition to the "ON" position without starting the engine. Locate the TPMS reset button under the dashboard and hold it until the TPMS indicator blinks twice. Release the button and drive the vehicle for a few miles to complete the reset.
The 2020 Mazda 6 typically requires SAE 0W-20 full synthetic engine oil for optimal performance. Always check your owner's manual for specific recommendations and ensure you use oil that meets the Mazda quality standards.
To improve fuel efficiency, ensure your tires are properly inflated, use the recommended grade of engine oil, remove excess weight from the vehicle, and drive smoothly by avoiding rapid acceleration and braking. Regular maintenance such as replacing air filters and ensuring proper alignment can also help.
To connect your smartphone to the Mazda Connect system, enable Bluetooth on your phone. On the infotainment screen, navigate to the 'Settings' menu, select 'Connectivity Settings', and then 'Bluetooth'. Choose 'Add New Device' and select your phone from the list. Confirm any pairing codes and follow the prompts to complete the connection.
The recommended maintenance schedule for the 2020 Mazda 6 includes regular oil and filter changes every 7,500 miles or 12 months, tire rotations every 7,500 miles, and brake inspections every 15,000 miles. It's also important to replace the cabin air filter annually and inspect the drive belts every 30,000 miles.
To replace a headlight bulb on your 2020 Mazda 6, first open the hood and locate the back of the headlight assembly. Remove the power connector and turn the bulb socket counterclockwise to release it. Replace the old bulb with a new one, ensuring you do not touch the glass part of the bulb. Reattach the socket and power connector, then test the headlights to ensure proper installation.
If the check engine light comes on, first ensure the gas cap is tightly secured, as this can trigger the light. If the light remains on, it's advisable to have the vehicle diagnosed by a professional using an OBD-II scanner to identify the specific issue. Avoid driving the car for extended periods until the problem is resolved to prevent potential damage.
To enable adaptive cruise control on your 2020 Mazda 6, press the 'CRUISE' button on the steering wheel to activate the system. Accelerate to your desired speed and press the 'SET' button to set the speed. Adjust the following distance using the distance control button. The system will automatically adjust your speed to maintain the set distance from the vehicle ahead.
The 2020 Mazda 6 typically has a sealed transmission system, so there is no dipstick for checking the fluid level. It's recommended to have the transmission fluid checked and serviced by a professional at the intervals specified in the owner's manual to ensure proper performance.
Common issues with the 2020 Mazda 6 may include infotainment system glitches, which can often be resolved by restarting the system or updating the software. If you experience unusual engine noises or vibrations, check for loose components or have the engine mounts inspected. Regular maintenance and prompt attention to warning lights can help prevent and troubleshoot these issues.