Lexus RX 2019 Owner's Manual
![Lexus RX 2019 SUV manual cover](/images/SZixqoHmKjTieshWpcuIyusI/thumbs/thumb175x175.webp)
To reset the maintenance light, turn on the ignition without starting the engine, press the "ODO/TRIP" button until the odometer reading is displayed, turn off the ignition, and then press and hold the "ODO/TRIP" button while turning the ignition back on. Continue holding the button until the maintenance light blinks and goes out.
The Lexus RX 2019 typically requires SAE 0W-20 synthetic oil for optimal performance. Always refer to the owner’s manual for the most accurate information.
To pair your phone, go to the "Setup" menu on the vehicle's infotainment screen, select "Bluetooth", and then "Add Device". Ensure your phone's Bluetooth is turned on and select your Lexus from the list of available devices. Follow the prompts to complete the pairing process.
To replace a flat tire, first ensure the vehicle is on a stable surface and turn on the hazard lights. Loosen the lug nuts slightly, then jack up the vehicle using the provided jack at the designated lift point. Remove the lug nuts and the flat tire, replace it with the spare, and hand-tighten the lug nuts. Lower the vehicle and tighten the lug nuts in a crisscross pattern.
The Lexus RX 2019 typically has a sealed transmission system, so checking the transmission fluid level is not a regular maintenance task. It is recommended to have it inspected by a professional at a Lexus service center.
The recommended tire pressure for the Lexus RX 2019 is usually around 33 psi for both front and rear tires. Always check the sticker located on the driver’s side door for the most accurate specifications.
To update the navigation system, visit the Lexus website to download the latest map updates onto a USB drive. Insert the USB drive into the vehicle’s USB port and follow the on-screen instructions to complete the update process.
If the key fob battery is low, you can replace it by opening the key fob case with a small flat-head screwdriver. Remove the old battery and insert a new CR2032 battery, ensuring the positive side faces up, then snap the case back together.
To activate the cruise control, press the "ON/OFF" button on the cruise control stalk. Accelerate to your desired speed, then push the stalk down to set the speed. Adjust the speed with the stalk by pushing up to increase or down to decrease.
To replace the air filter, open the hood and locate the air filter housing. Unclip the housing cover and remove the old filter. Insert a new air filter ensuring it is seated properly, then reattach the housing cover by securing the clips.