Lexus LS 2019 Owner's Manual
![Lexus LS 2019 Sedan manual cover](/images/BASmyoWbTjNMvyzXhtWIrXLj/thumbs/thumb175x175.webp)
To connect your smartphone to the Lexus LS 2019's Bluetooth system, first ensure that Bluetooth is enabled on your phone. Then, on the vehicle's multimedia screen, go to 'Menu' > 'Setup' > 'Bluetooth'. Select 'Add Device' and choose your phone from the list. Follow the on-screen prompts to complete the pairing process.
The recommended tire pressure for the Lexus LS 2019 Sedan is typically 35 PSI for both the front and rear tires. However, it's advisable to check the sticker located on the driver's side door jamb for exact specifications.
To reset the maintenance required light on your Lexus LS 2019, turn the ignition switch to the 'ON' position without starting the engine. Use the 'Trip' button to navigate to the 'ODO' display. Turn off the ignition. Hold the 'Trip' button while turning the ignition back to 'ON'. Keep holding the button until the odometer displays '000000', indicating the reset is complete.
The Lexus LS 2019 typically requires SAE 0W-20 synthetic oil. It's best to consult the owner's manual or contact a Lexus dealership for the most accurate information.
To replace the key fob battery for a Lexus LS 2019, slide the release button on the back of the fob and remove the mechanical key. Use a small flathead screwdriver to gently pry open the fob. Replace the old battery with a new CR2032 battery, ensuring the positive side faces up. Reassemble the fob and reinsert the mechanical key.
If the navigation system in your Lexus LS 2019 is not working, first try restarting the system by turning off the engine and restarting the car. Check for any available software updates and ensure the SD card is properly inserted. If the issue persists, consult a Lexus dealership for further diagnostics.
To enable the adaptive cruise control on the Lexus LS 2019, press the 'ON/OFF' button on the steering wheel to activate the system. Accelerate to your desired speed and press the 'SET' button to set it. Use the controls to adjust the following distance and speed as needed.
To update the Lexus LS 2019 infotainment system, check the Lexus website or contact a dealership to see if an update is available. If so, download the update to a USB drive. Insert the drive into the vehicle’s USB port and follow the on-screen instructions to install the update.
To adjust the head-up display settings on a Lexus LS 2019, use the controls located on the dashboard to the left of the steering wheel. You can adjust the brightness, position, and content displayed using these controls. Refer to the owner's manual for detailed instructions.
To perform a factory reset on the Lexus LS 2019 multimedia system, go to 'Menu' > 'Setup' > 'General'. Scroll down and select 'Delete Personal Data'. Confirm the selection to reset the system to its factory settings. This process will remove all personal data, so ensure any important information is backed up.