Lexus LS 2012 Owner's Manual
![Lexus LS 2012 Sedan manual cover](/images/EQKeGQozMzuFCWcTcBEeyMNT/thumbs/thumb175x175.webp)
The recommended tire pressure for the Lexus LS 2012 Sedan is 32 PSI for both front and rear tires. Always check the tire pressure when the tires are cold for an accurate reading.
To reset the maintenance light, turn the ignition switch to the "ON" position, press the odometer button until the total mileage is displayed, then turn the key to the "OFF" position. Hold the odometer button and turn the ignition back to "ON". The maintenance light will flash and go off.
The recommended engine oil for the Lexus LS 2012 is SAE 5W-30. It is important to use the correct oil viscosity to ensure optimal engine performance and longevity.
To pair your phone, ensure Bluetooth is enabled on your device. On your car's navigation screen, go to 'Setup' > 'Bluetooth' > 'Add Device'. Follow the prompts on the screen and on your phone to complete the pairing process.
The Lexus LS 2012 Sedan is not specifically designed for towing, and it is generally recommended not to tow with this vehicle to avoid potential damage and ensure safety.
A rough idle in a Lexus LS 2012 can be caused by various issues such as dirty fuel injectors, a clogged air filter, or a faulty spark plug. It is advised to have a professional mechanic diagnose the problem.
The timing belt in the Lexus LS 2012 should typically be replaced every 90,000 miles or every 6 years, whichever comes first. Regular inspections are recommended to avoid potential engine damage.
To change a flat tire, secure the vehicle on a flat surface, use the jack to lift the car, remove the lug nuts, replace the flat tire with the spare, and tighten the lug nuts in a star pattern. Lower the car and ensure all lug nuts are secure.
To improve fuel efficiency, maintain proper tire pressure, perform regular maintenance, avoid excessive idling, and drive at a consistent speed. Removing excess weight from the vehicle can also help.
If the check engine light comes on, ensure the gas cap is tight. If the light remains, use an OBD-II scanner to check for error codes, or have a professional mechanic diagnose the issue to prevent potential damage.