Lexus GS 2015 Owner's Manual
![Lexus GS 2015 Sedan manual cover](/images/DqzPkANJznabPBLuwXROmhvz/thumbs/thumb175x175.webp)
To reset the TPMS, ensure your tires are properly inflated. Turn the ignition to the "On" position without starting the engine. Locate the TPMS reset button beneath the steering column. Press and hold the button until the TPMS indicator blinks three times, then release. Drive the car for a few minutes to allow the system to recalibrate.
The 2015 Lexus GS Sedan typically requires SAE 0W-20 synthetic oil for optimal performance. This oil provides excellent fuel economy and protection in a variety of driving conditions. Always check the owner's manual for the most accurate information.
To pair your smartphone, ensure Bluetooth is enabled on your phone. On the vehicle's multimedia screen, go to "Setup" > "Bluetooth" > "Add Device." Your car's system will search for nearby devices. Select your phone from the list and confirm any prompts on your phone to complete the pairing process.
If the check engine light illuminates, first ensure that the gas cap is tightly secured, as a loose cap can trigger the light. If the light remains on, have the vehicle inspected by a professional mechanic to diagnose and address any potential issues.
It is recommended to replace the cabin air filter every 15,000 to 20,000 miles, or once a year, depending on driving conditions. Regular replacement ensures optimal air quality and HVAC system performance.
To activate ECO mode, locate the drive mode selector knob on the center console. Turn the knob to the left until the ECO mode indicator appears on the dashboard. ECO mode optimizes fuel efficiency by adjusting throttle response and climate control settings.
The recommended tire pressure for the 2015 Lexus GS Sedan is typically 35 psi for both front and rear tires. However, always refer to the placard on the driver's side door jamb for the most accurate information.
To update the navigation system, you should visit a Lexus dealership or use the Lexus website to order the latest map update. Some updates may be available via a USB drive or directly through the vehicle's infotainment system, depending on the model's capabilities.
To jump-start your Lexus GS, connect the positive (red) jumper cable to the positive terminal of the dead battery and the positive terminal of the good battery. Attach the negative (black) cable to the negative terminal of the good battery and a metal ground on the vehicle with the dead battery. Start the assisting vehicle, then the Lexus. Disconnect cables in reverse order.
For optimal performance, follow the maintenance schedule outlined in your owner's manual. This typically includes oil changes every 5,000 to 10,000 miles, tire rotations, brake inspections, and fluid checks. Regular service at a Lexus dealership is recommended for thorough care.